If you send a MQTT message for relay (MiGateway/0x00158D0003CB8DEE/set/state_l1/) the watchdog is triggered. It occures first about 6 minutes after gateway started. Other binded devices work fine.
The configuration with the same hardware, but without ESP32 was tested with zigbee2mqtt and it works.
If you send a MQTT message for relay (MiGateway/0x00158D0003CB8DEE/set/state_l1/) the watchdog is triggered. It occures first about 6 minutes after gateway started. Other binded devices work fine. The configuration with the same hardware, but without ESP32 was tested with zigbee2mqtt and it works.
Here are the logs: 192.168.188.57-20200212-212116.log 192.168.188.57-20200211-190633.log
Configuration: