[master-20190407] Too much gap fill

smartavionics / CuraEngine

CuraEngine is a powerful, fast and robust engine for processing 3D models into 3D printing instruction for Ultimaker and other GCode based 3D printers. It is part of the larger open source project called "Cura".

https://ultimaker.com/en/products/cura-software

GNU Affero General Public License v3.0

12 stars 7 forks source link

[master-20190407] Too much gap fill #4

Open Timocop opened 5 years ago

Timocop commented 5 years ago

Platform Windows 10 x64

Steps to Reproduce Have model with big gaps. Or just increase 'Skin Overlap Percentage'.

Actual Results Makes to large gap fill too print.

Expected results Should replace big gaps into skin instead.

Additional Information Too much gap fill: No gap fill (Slic3r and Cura 4.0 does fill it):

smartavionics commented 5 years ago

Have you tried changing the Inner Layer Minimum Gap Area?

Timocop commented 5 years ago

Yes, but its either no gap fill or still too much.

Project: PI3_Arm.zip