Open djbiti1 opened 5 days ago
Well, somehow after flashing it a few more times, it started working again, I bound it to the relay once more and seems to be fine.
Здравствуйте, обратите внимание что страница свойства у вас стала выглядеть по другому. Всё дело в том, что внешний конвертер у вас не применяется zigbee2mqtt. Работает видимо на встроенном конвертере. Кто его добавлял в zigbee2mqtt я не знаю. Вам необходимо открыть внешний конвертер в редакторе и удалить одну строку в самом начале файла. Это проблема апрельского релиза. Посмотрите по этой ссылке что нужно удалить из файла внешнего конвертера - https://t.me/EfektaNews/168
Или тут в обсуждении - https://t.me/diy_devices/52561
I just realized, the sensor temperature and humidity attributes were not bound to the coordinator and the values were not updating. After I bound them it started working fine again.
I am not using the external converter, Z2M seems to have an internal one that worked fine for the most part. Should I switch to the external one? Is there a benefit?
Hey, The sensor was working fine for a while, it was bound directly to a relay. A few weeks ago it stopped reporting anything and controlling the relay. Thought the battery was dead, but I replaced it and nothing. Now I reflashed it with the newest firmware and still nothing but LQI. It pairs fine, if I hold the button for 10 sec it leaves the network, so I guess the zigbee part is still fine. Is the rest of it dead? I also tried to update z2m and no improvement.