search

smith3d / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
http://marlinfw.org
GNU General Public License v3.0
95 stars 32 forks source link

ender 3 v2 extender #13

Open geedog66 opened 3 years ago

geedog66 commented 3 years ago

I have your firmware downloaded on my ender 3 v2 printer and i recently purchased the ender extender kit which makes my printer 400 x 400 x 500.. I still want to keep the features in your current firmware just be able to use it on my upgraded printer.. any help will be appreciated thanks..

Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md

Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use one of the support links at https://github.com/MarlinFirmware/Marlin/issues/new/choose

Before filing an issue be sure to test the "bugfix" branches to see whether the issue has been resolved.

-->

Description

Feature Workflow

  1. [First Action]
  2. [Second Action]
  3. [and so on...]

Additional Information

jpbarcellos commented 3 years ago

image

dcwalmsley commented 3 years ago

@geedog66

Do you have a BLTouch installed? I am building off Smith3D's master a 400x400x250 version. I can compile one for you with 400x400x500 if that will work with you.

Also need to know what version of Ender you are using.

jpbarcellos commented 3 years ago

yes, i do have bl touch. I already did the compilation and everything is working normal. the only thing I couldn't get it to work on was the filament sensor. Can you help me with this? My Ender is v2 thanks

Natech603 commented 3 years ago

I cant get my compilations to work using smith3d I have an ender 3 v2 with the 400x400x250 extender kit with bltouch v3. Ive tried a bunch of different firmware mods and different codes but cant seem to actually probe the proper coordinates. it works 100% fine on my stock build area e3v2 just not with the extender kit. If yall could help me out thaTD be more lit than christmas.