Get working 100% on 1.1.1 iphone

[GoogleCodeExporter]

Seems to install fine through AppTapp.  At first didn't run for me but then
after a reboot seemed to run fine.

issues:

Not all (but some) custom sounds can be replaced.

Original issue reported on code.google.com by stevele...@gmail.com on 10 Oct 2007 at 9:38

[GoogleCodeExporter]

This is high priority.

Original comment by johnnyli...@gmail.com on 11 Oct 2007 at 7:59

• Added labels: Priority-Critical
• Removed labels: Priority-Medium

[GoogleCodeExporter]

One problem seems to be on install.  When I installed it through apptapp I 
needed to
reboot and launch it 4+ times before it would work.  Then it worked great and 
has
ever since.  

Replacing the sms received sound doesn't work.  I'm pretty sure this is because 
you
can now choose between multiple sounds.  Battery, badge, strings, carrier logo, 
dock,
wifi, bars, chat balloons, all sliders, and highlight mask are working.

Original comment by stevele...@gmail.com on 11 Oct 2007 at 9:23

[GoogleCodeExporter]

i noticed that turning wifi on and off (and therefore ssh on and off) let me use
customize

Original comment by chrismee...@gmail.com on 12 Oct 2007 at 9:46

[GoogleCodeExporter]

Same results as stevelenti. After several attempts the app started working. 
Maybe it
has a series of steps to perform on the first start that were failing. And, 
after a
few starts it got past them.

Original comment by joseph.j...@gmail.com on 12 Oct 2007 at 1:30

[GoogleCodeExporter]

still not working here with 1.1.1, launch and crashes immediately

Original comment by rene.lu...@gmail.com on 15 Oct 2007 at 11:56

[GoogleCodeExporter]

rene.

Just reboot and relaunch.  It takes about 4 times launching to get it to 
actually
launch correctly.

-Steve

Original comment by stevele...@gmail.com on 15 Oct 2007 at 1:17

[GoogleCodeExporter]

Working on an iPod touch. I also had to reboot/relaunch a number of times until 
Customize would run. Now it runs, but no changes get saved. Seems to have no 
impact 
(specifically SpringBoard reordering with rSBT)

Original comment by gregcut...@gmail.com on 15 Oct 2007 at 8:55

[GoogleCodeExporter]

Same with rene.luria, i cant launch it. tried to install manually and from
install.app but with no avail

Original comment by wanderin...@gmail.com on 16 Oct 2007 at 1:38

[GoogleCodeExporter]

the icon reordering doesnt work on the second page (for iphone), at all. Im 
pretty sure this is a result of the 
setting tab's choice of # of icons to be displayed. tried all kinds of shit, 
cant get it working. dont know if others 
are having this problem.

Original comment by mediumof...@gmail.com on 20 Oct 2007 at 4:07

[GoogleCodeExporter]

@9 i'm having the same issue

Original comment by kevanh...@gmail.com on 20 Oct 2007 at 4:19

[GoogleCodeExporter]

Custom sounds do not work such as SMS Email Alarm etc etc etc

Original comment by WesGar...@gmail.com on 22 Oct 2007 at 2:34

[GoogleCodeExporter]

same problem, installed with instller 3.04 and just crashes. tried reinstalling 
many
times.

Original comment by aga...@gmail.com on 22 Oct 2007 at 12:47

[GoogleCodeExporter]

I'm having the same problem with the reordering of icons not working on page 2. 
 Has anybody come up with 
a solution to this problem?

Also, I was wondering if someone knows how to, say, have only the original 12 
icons on the first page (4th 
row will be blank) and then on page 2 a group of icons (i.e.: 5 or 6 or 
whatever games) and then on another 
page another group of icons, etc, etc.

I have seen that being done on the "Stacks" video on an iTouch.  I would love 
to be able to set groups of icons 
on a per-page basis without having to fill the page before getting a new one.

Any ideas???

Original comment by oca...@gmail.com on 23 Oct 2007 at 12:54

[GoogleCodeExporter]

When i installed it with installer.app (after i upgraded to 1.1.1) It worked 
fine for a day then I downloaded the 
Borat sound files and now it wont run at all just crashes. I tried rebooting 
multiple times and reinstalling it. But 
no improvements. 

Original comment by onewired...@gmail.com on 25 Oct 2007 at 3:13

[GoogleCodeExporter]

on 1.1.1 (just upgraded) and reinstalled customize. it crashed, and wouldn't 
let me
reinstall it.

This morning it did.
and was working 6-7 times. now crashes over and over. attempted several 
uninstall
reboot, installs but to no avail.

Original comment by Bradley....@gmail.com on 27 Oct 2007 at 5:11

[GoogleCodeExporter]

I got mine to work by turning WIFI off as well.  Give it a shot.

Original comment by brian...@gmail.com on 30 Oct 2007 at 12:39

[GoogleCodeExporter]

Hi,

When you install Customize for first time on the 1.1.1 crashed. I think is 
because
you need to install some images, sounds etc. firt. Install them and Customize 
run.

Original comment by jme...@gmail.com on 30 Oct 2007 at 3:04

[GoogleCodeExporter]

After updating to iPhone 1.1.1 Customize would not run. Tried reinstalling an 
still 
would not run. After I tried installing BDS Subsustem it ran after trying to 
run 
customize 4 more times.

Original comment by cart...@gmail.com on 30 Oct 2007 at 10:55

[GoogleCodeExporter]

@ cartboy

That seemed to do the trick for me as well. I'm now running Customize 1.13 on
Firmware 1.1.1 without troubles. Good tip. Thanks!

Original comment by tekbud...@gmail.com on 31 Oct 2007 at 10:29

[GoogleCodeExporter]

@ cartboy - thank you. was able to open customize using your steps. however, 
none of
my changes (dock order, springboard order) are saved.

Original comment by nomorest...@gmail.com on 1 Nov 2007 at 12:54

[GoogleCodeExporter]

@ cartboy
OMG IT WORKS!!!! Thanks cartboy!!!!

Original comment by wanderin...@gmail.com on 3 Nov 2007 at 7:26

[GoogleCodeExporter]

With BSD subsystem installed, and after it crashed 3 times and ran on the 
fourth, I can change certain things like 
the main slider, but not al of my battery icons change.  I can select the ones 
downloaded using Installer, but any 
adding manually through ssh (BatteryBG images only so far) don't seem to work.  
It lists them, you can select 
them and tell it to change them, but when it does nothing is changed.

Original comment by del...@gmail.com on 4 Nov 2007 at 10:59

[GoogleCodeExporter]

2 users report that dial pad images are not working in 1.1.1. Badges and other 
images are reported as 
working ok. 

Original comment by boxju...@gmail.com on 5 Nov 2007 at 12:57

[GoogleCodeExporter]

Any changes I make in rSBT do not seem to affect my icons at all. Is there some 
setting i am missing? I hit save. 
Springboard relaunches and nothing.

iPhone, 1.1.1, jailbreaked @ jailbreakme.com, unlocked: anySIM 1.1

Original comment by MemeSli...@gmail.com on 7 Nov 2007 at 2:39

[GoogleCodeExporter]

My findings are the same as  chrismeehan - toggling wifi worked for me.

Original comment by matt.sep...@gmail.com on 8 Nov 2007 at 1:05

[GoogleCodeExporter]

WiFi on or off, icon order never changes. Damn it.

Original comment by MemeSli...@gmail.com on 8 Nov 2007 at 7:41

[GoogleCodeExporter]

The only way get rSBT work on 1.1.1. is to set to 16 icons.

Original comment by jme...@gmail.com on 10 Nov 2007 at 6:02

[GoogleCodeExporter]

jmerhi, you are my hero.  I set it to 16 and it saved my icon order.  Thanks.

Original comment by scottie...@gmail.com on 12 Nov 2007 at 8:58

[GoogleCodeExporter]

This thread addressed a number of problems, most of which have been solved with 
the
latest release.

Original comment by johnnyli...@gmail.com on 13 Nov 2007 at 2:54

• Changed state: Fixed