usb 3.0 drives wont work

GoogleCodeExporter commented 8 years ago

What steps will reproduce the problem?
1. Start HBC
2. Load any d2x-cios based usb loader

What is the expected output? What do you see instead?
Usb loader starts and loads games. Usb loader stays at start screen.

What version of the product are you using? On what operating system?
d2x-cios v8 beta 41, cfg usb loader-070 (cios 249 based), WII 4.3U.

Please provide any additional information below.
if you try to start the usb loader based on hermes cios (222,223,224) it starts 
and loads games just fine but cant use d2x cios once the usb loader is running.

Original issue reported on code.google.com by elvio.gu...@gmail.com on 15 Jan 2012 at 3:28

GoogleCodeExporter commented 8 years ago

I run D2X ver 6 on a usb 3.0 drive without any issues:
Install d2Xv6 into slot 248 base 56
Install d2Xv6 into slot 247 base 57
usb 3.0 1TB drive (Seagate STAY1000102)
Configurable usb loader ver 70 using slot 248 only, System Menu 4.1

Maybe you don't have the right bases ? There is NO need for slot 249, just use 
the default 248 is what I would recommend.
Have also used D2X ver 7 final with the same bases and no difficulties with 
Config USB Loader (slot 248)

Original comment by rocketju...@gmail.com on 26 Jan 2012 at 9:22

GoogleCodeExporter commented 8 years ago

I too have used a Seagate USB 3.0 drive with no issues.  It was the portable 
1TB version.  It works at USB 2.0 speeds of course but it worked no issues.
I used D2x V6 249 base 57 
and 250 base 56

Original comment by skater4...@gmail.com on 26 Jan 2012 at 9:43

GoogleCodeExporter commented 8 years ago

does you hdd drives uses external power or just usb??

Original comment by elvio.gu...@gmail.com on 26 Jan 2012 at 11:32

GoogleCodeExporter commented 8 years ago

Got Mighty Channels 11.1 working well with one big fat32 2TB usb 2.0 hard 
drive. Need up update with D2xV7-final base 56 into slot 249, go to advanced 
and update SYSCONF. Works well.

Had a similar problem of Mighty Channels giving 1 minutes pauses for each game 
load on a fat32 usb 3.0 1TB drive (Seagate STAY1000102), green mode already 
disabled. Fixed with D2xV7-final

Original comment by rocketju...@gmail.com on 27 Jan 2012 at 12:24

GoogleCodeExporter commented 8 years ago

All the drives I worked with have an external power supply to the hard drive.

Original comment by rocketju...@gmail.com on 27 Jan 2012 at 12:27

GoogleCodeExporter commented 8 years ago

all drives with external power wont fail... im talking about usb only drives.

Original comment by elvio.gu...@gmail.com on 27 Jan 2012 at 12:32

GoogleCodeExporter commented 8 years ago

This is not true, I have personally tested some non working hdd usb 2.0 with 
external power.
So this issue is not strictly related to power type and/or usb version.
Unfortunately certain problematic hdd are not supported by the cios and others 
work properly only with certain loaders.
I suggest you to try additional power supply, i.e. a usb Y cable.
I'm gonna close this report but feel free to keep on discussing it here.

Original comment by dav...@yahoo.it on 27 Jan 2012 at 12:54

Changed state: Invalid

GoogleCodeExporter commented 8 years ago

mmm... ill try that but the usb 3.0 plug on these drives are different and a Y 
cable could be a problem to find...

Original comment by elvio.gu...@gmail.com on 27 Jan 2012 at 1:24

GoogleCodeExporter commented 8 years ago

For what it's worth, I AM NOT able to get WiiMC to work with my usb 3.0 1TB 
drive. WiiMC has ties to cios 236 and can not use D2X advantages.

Original comment by rocketju...@gmail.com on 27 Jan 2012 at 5:15

smurk-too / d2x-cios

usb 3.0 drives wont work #21