search

sn4k3 / Ender3

Supercharge your Ender3 with Guides, Mods and Addons
GNU General Public License v3.0
606 stars 108 forks source link

Intro priming line collides with paper clips #8

Closed probonopd closed 5 years ago

probonopd commented 5 years ago

The intro priming line collides with where most people would normally put their paper clips for attaching the flexible plate that comes with the later revisions of the Ender 3.

Hence, the intro priming line should be moved e.g., to the side, where no paper clips are usually installed.

sn4k3 commented 5 years ago

The profiles provide a base for users, the start gcode must be tuned by the user itself, since Ender3 is heavy modded i can't provide every case-of-use profile. The prime line is based on stock Ender3 (without ultrabase). BTW i also have a custom base and i hate clips because of that and smaller area, so i use Kypton tape all arround +/- 5mm edge. Have hard objects under nozzle area is always a bad idea, bad things can happen...

probonopd commented 5 years ago

Have hard objects under nozzle area is always a bad idea, bad things can happen...

Learned that the hard way...

Which is why I am asking if you would be fine with having the priming line e.g., on the left side rather than on the front (like in the Ender-3 Cura profile). It should not make a difference in your use case but help those who still need paper clips.

sn4k3 commented 5 years ago

I can do that latter. But you can see my 0.6mm DD profile which have prime line that way and replace the gcode for your profile. You can also send a pull request with that mod

sn4k3 commented 5 years ago

Change prime to Y on new release

probonopd commented 5 years ago

Thanks. :+1: