search

snip / OGN-receiver-RPI-image

Process to create a Raspberry Pi SD image for OGN receiver
GNU General Public License v3.0
17 stars 7 forks source link

WiFi config does not appear to work for AU #14

Closed ramoun closed 5 years ago

ramoun commented 6 years ago

Edited the 3 WiFi values for Australia "AU" in the config file, but WiFi does not work.

I can edit via sudo raspi-config and it runs ok.

snip commented 6 years ago

Hi, when you set the "AU" in the OGN config file can you please check what you get in /etc/wpa_supplicant/wpa_supplicant.conf? And what do u get when u do it via raspi-config?

Thanks

ramoun commented 6 years ago

Sure I’ll test an let you know.

Cheers Steve

From: Sebastien Chaumontet [mailto:notifications@github.com] Sent: Sunday, 29 July 2018 12:10 PM To: snip/OGN-receiver-RPI-image OGN-receiver-RPI-image@noreply.github.com Cc: Steve Trone steve@techexecs.com.au; Author author@noreply.github.com Subject: Re: [snip/OGN-receiver-RPI-image] WiFi config does not appear to work for AU (#14)

Hi, when you set the "AU" in the OGN config file can you please check what you get in /etc/wpa_supplicant/wpa_supplicant.conf? And what do u get when u do it via raspi-config?

Thanks

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/snip/OGN-receiver-RPI-image/issues/14#issuecomment-408646863, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ADXDT6PX-V3ZfWJdVeioz7AvzMOfUPsIks5uLRljgaJpZM4VHEQy.

snip commented 5 years ago

Hi @ramoun, any news about your test?

ramoun commented 5 years ago

Hi Seb,

I tested and have it running on 1 station.

I’m not sure of the exact process or steps, but it would be easier to consider it ok, then if I come across it again and can replicate it I open another ticket with the detail.

I tried to close it but it would not let me for some reason, could you do this.

Cheers Steve

From: Sebastien Chaumontet [mailto:notifications@github.com] Sent: Thursday, 3 January 2019 1:46 AM To: snip/OGN-receiver-RPI-image OGN-receiver-RPI-image@noreply.github.com Cc: Steve Trone steve@techexecs.com.au; Mention mention@noreply.github.com Subject: Re: [snip/OGN-receiver-RPI-image] WiFi config does not appear to work for AU (#14)

Hi @ramounhttps://github.com/ramoun, any news about your test?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/snip/OGN-receiver-RPI-image/issues/14#issuecomment-450881283, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ADXDTy-qB8blm61-7OpROUOImV8FGfRvks5u_MYwgaJpZM4VHEQy.

snip commented 5 years ago

Sure. Closing it.

See u.