search

snowdd1 / homebridge-knx

KNX platform shim for homebridge
https://github.com/nfarina/homebridge
GNU General Public License v2.0
97 stars 56 forks source link

Help with shutter control please #133

Open pipa2493 opened 5 years ago

pipa2493 commented 5 years ago

Hello. please tell me what design should be used, and it is already confused... I have no feedback from the motor.... 2/0/0-telegram 0 (close), telegram 1 (open) 2/0/1-stop default

snowdd1 commented 5 years ago

What is the third line in the picture?

pipa2493 commented 5 years ago

1 byte is the value for the position of the curtains, but do not use it because there is no feedback from the motor

pipa2493 commented 5 years ago

use 1 bit to control. Is it possible in homekit?

snowdd1 commented 5 years ago

No. You need to specify the run times in ETS for your motor, so the actuator control can calculate run times to percentages.

pipa2493 commented 5 years ago

Ok. Thanks. What about feedback?

snowdd1 commented 5 years ago

For my GIRA actuators I can activate a feedback object that provides active feedback on the position the same way. So you have a set and a listen address. Look at the parameter configuration of your actuator.