issues
search
snurce
/
optiboot
Automatically exported from code.google.com/p/optiboot
0
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
VIRTUAL_BOOT doesn't work
#120
GoogleCodeExporter
opened
8 years ago
3
Add explicit copyright in all source files.
#119
GoogleCodeExporter
opened
8 years ago
0
"omake" build tools don't work with Arduino 1.5.x and 1.6.x IDE versions
#118
GoogleCodeExporter
opened
8 years ago
1
Documentation doesn't explain optiboot use OUTSIDE of Arduino environment.
#117
GoogleCodeExporter
opened
8 years ago
1
Triggering of watchdog when using SOFT_UART option
#116
GoogleCodeExporter
opened
8 years ago
2
Consider making the boot timeout a Make option
#115
GoogleCodeExporter
opened
8 years ago
1
Works without issue on atmega644p
#114
GoogleCodeExporter
closed
8 years ago
1
baudcheck doesn't pay attention to SINGLESPEED
#113
GoogleCodeExporter
opened
8 years ago
1
LED_DATA_FLASH possible issue
#112
GoogleCodeExporter
closed
8 years ago
2
Fast start mod doesn't always work on Uno boards.
#111
GoogleCodeExporter
opened
8 years ago
1
Drop support for memory reads/writes with length longer than 256 bytes
#110
GoogleCodeExporter
closed
8 years ago
8
OPTIBOOT_CUSTOMVER is not working
#109
GoogleCodeExporter
opened
8 years ago
2
BIGBOOT=1 results in section overlapping
#108
GoogleCodeExporter
opened
8 years ago
2
Recent AVRDUDE unhappy with efuse values in atmega328_isp targets
#107
GoogleCodeExporter
opened
8 years ago
1
Content of AVR_FREQ gets messed up --> F_CPU set to invalid characters (random?)
#106
GoogleCodeExporter
opened
8 years ago
9
bobuino optiboot makefile LED pin != pins_arduino.h LED pin
#105
GoogleCodeExporter
closed
8 years ago
3
optiboot is wrong but "lucky" on chips (1280, 1284) with 256 bytes/page
#104
GoogleCodeExporter
closed
8 years ago
3
omake doesn't work with Arduino 1.5.x directory structure.
#103
GoogleCodeExporter
closed
8 years ago
1
Permit 1Mbps BAUD_RATE
#102
GoogleCodeExporter
closed
8 years ago
2
Doesn't compile with gcc4.7 or gcc4.8
#101
GoogleCodeExporter
closed
8 years ago
8
Split makefile for production/extra platforms
#100
GoogleCodeExporter
closed
8 years ago
3
Support application section writing to flash, on big parts?
#99
GoogleCodeExporter
opened
8 years ago
0
Save space by rebooting more slowly
#98
GoogleCodeExporter
opened
8 years ago
1
MCUSR is cleared in bootloader
#97
GoogleCodeExporter
opened
8 years ago
6
optiboot 5.0a with atmega8@8MHZ does not work but v4.4 does.
#96
GoogleCodeExporter
opened
8 years ago
2
optiboot build on Mac
#95
GoogleCodeExporter
closed
8 years ago
2
EEPROM r/w support
#94
GoogleCodeExporter
opened
8 years ago
10
Missing bootloader for Atmega1280 in optiboot-v5.0a.zip
#93
GoogleCodeExporter
closed
8 years ago
3
optboot 5.0a - more than 64k?
#92
GoogleCodeExporter
closed
8 years ago
2
GitHub migration
#91
GoogleCodeExporter
closed
8 years ago
6
bash should be used instead of sh
#90
GoogleCodeExporter
closed
8 years ago
4
Sketch seems bigger after upload
#89
GoogleCodeExporter
closed
8 years ago
4
Make on windows - ld crashes?
#88
GoogleCodeExporter
opened
8 years ago
5
load osccal for use with 8M internal oscillator.
#87
GoogleCodeExporter
opened
8 years ago
2
Optiboot v5.0 doesn't make
#86
GoogleCodeExporter
closed
8 years ago
3
baudcheck bad substitution
#85
GoogleCodeExporter
closed
8 years ago
4
boards.txt has incorrect upload.protocol
#84
GoogleCodeExporter
closed
8 years ago
1
Some options not specifiable to OFF state.
#83
GoogleCodeExporter
opened
8 years ago
0
BIGBOOT could store build information
#82
GoogleCodeExporter
opened
8 years ago
0
Use of double-speed BRG on UART should be an option.
#81
GoogleCodeExporter
opened
8 years ago
0
Implement PRODUCTION and NONPRODUCTION targets.
#80
GoogleCodeExporter
opened
8 years ago
1
Provide warnings for inaccurate baud rates.
#79
GoogleCodeExporter
closed
8 years ago
1
Many board-level targets are obsolete...
#78
GoogleCodeExporter
opened
8 years ago
1
Support ATmega32
#77
GoogleCodeExporter
closed
8 years ago
2
Oscillator fuse value: low power vs full swing
#76
GoogleCodeExporter
closed
8 years ago
2
RAMPZ ignored in NRWW determination
#75
GoogleCodeExporter
closed
8 years ago
3
Clarify and update boards.txt
#74
GoogleCodeExporter
opened
8 years ago
4
Save about 20 bytes by using a smarter version of LPM/ELPM.
#73
GoogleCodeExporter
closed
8 years ago
1
Patch for /optiboot/boards.txt
#72
GoogleCodeExporter
closed
8 years ago
3
Optimize optiboot.c for manual m328 reset
#71
GoogleCodeExporter
closed
8 years ago
2
Next