Cell amount problem - Githubissues

darkazar commented 10 months ago

Is there an existing issue for this?

[X] I have searched the existing issues

Used Hardware?

Wemos D1 Mini

What happened?

After updateing from 2.10 to 2.12 over ota i see different ampunt of cells over mqqt and web interface. I have 16s cells and over web inteface is only 8 visible.

Screenshots / Fotos

Screenshot_20240123_160731_Chrome Screenshot_20240123_160739_Home Assistant

Steps To Reproduce

No response

Version

2.x.x and above

Relevant livejson output

{"Device":{"Name":"Daly2MQTT","IP":"192.168.1.179","ESP_VCC":3.789,"Wifi_RSSI":-61,"Relais_Active":false,"Relais_Manual":false,"sw_version":"2.12.0","Flash_Size":4194304,"Sketch_Size":448512,"Free_Sketch_Space":3723264},"Pack":{"Voltage":64.4,"Current":0,"Power":0,"SOC":97.7,"Remaining_Ah":99.6,"Cycles":16,"BMS_Temp":22,"Cell_Temp":22,"cell_hVt":4.15,"cell_lVt":2.8,"cell_hVt2":4.2,"cell_lVt2":3.4,"pack_hVt":66.4,"pack_lVt":44.8,"pack_hVt2":67.2,"pack_lVt2":55,"High_CellNr":11,"High_CellV":4.033,"Low_CellNr":1,"Low_CellV":4.02,"Cell_Diff":13,"DischargeFET":true,"ChargeFET":true,"Status":"Stationary","Cells":16,"Heartbeat":182,"Balance_Active":false,"Fail_Codes":""},"CellV":{"CellV_1":4.02,"CellV_2":4.03,"CellV_3":4.032,"CellV_4":4.03,"CellV_5":4.03,"CellV_6":4.031,"CellV_7":4.03,"CellV_8":4.031,"CellV_9":4.032,"CellV_10":4.03,"CellV_11":4.033,"CellV_12":4.033,"CellV_13":4.033,"CellV_14":4.033,"CellV_15":4.032,"CellV_16":4.031},"CellTemp":{"Cell_Temp_1":22}}

Which BMS is connected?

Daly 16S 60V 150A 20240123_161343

What browsers are you seeing the problem on?

Chrome

mt-mrx commented 10 months ago

I see the same issue, have a 15S 60A BMS and see only 8 cells in web gui, via MQTT I see the values for all 15 cells. Also in Web gui you see in my screenshot that cell 13 is highest cell, but graph shows only 8 cells.

softwarecrash commented 10 months ago

@darkazar @mt-mrx please try this version Daly2MQTT_d1_mini_2.12.1.zip