[Bug]: DALY BMS with Daly2MQTT 2.11.0 works fine but all new firmware no communication

AudipowerS4 commented 9 months ago

Is there an existing issue for this?

[X] I have searched the existing issues

Used Hardware?

Wemos D1 Mini

What happened?

DALY BMS to MQTT 2.2.11 Firmware works fine ... but all firmware later i have problem with Communication.

Screenshots / Fotos

grafik grafik

Steps To Reproduce

No response

Version

2.x.x and above

Relevant livejson output

{"Device":{"Name":"Daly2MQTT","IP":"192.168.188.63","ESP_VCC":3.284,"Wifi_RSSI":-71,"Relais_Active":false,"Relais_Manual":false,"sw_version":"2.13.0","Flash_Size":4194304,"Sketch_Size":448544,"Free_Sketch_Space":3723264},"Pack":{"Voltage":0,"Current":0,"Power":0,"SOC":0,"Remaining_Ah":0,"Cycles":0,"BMS_Temp":0,"Cell_Temp":0,"cell_hVt":0,"cell_lVt":0,"cell_hVt2":0,"cell_lVt2":0,"pack_hVt":0,"pack_lVt":0,"pack_hVt2":0,"pack_lVt2":0,"High_CellNr":0,"High_CellV":0,"Low_CellNr":0,"Low_CellV":0,"Cell_Diff":0,"DischargeFET":false,"ChargeFET":false,"Status":"Offline","Cells":0,"Heartbeat":0,"Balance_Active":false,"Fail_Codes":""},"CellV":{},"CellTemp":{}}

Which BMS is connected?

DALY BMS 200A UART

What browsers are you seeing the problem on?

Firefox

AudipowerS4 commented 9 months ago

UPDATE: last Firmware Daly2MQTT-d1-mini-2.11.0.bin Works

softwarecrash commented 9 months ago

can you flash the debug version and grab the usb-serial data or webserial data?

AudipowerS4 commented 9 months ago

{"Device":{"Name":"Batterie1","IP":"192.168.188.63","ESP_VCC":3.284,"Wifi_RSSI":-75,"Relais_Active":false,"Relais_Manual":false,"sw_version":"2.13.0_debug d1_mini Feb 11 2024 15:36:40","Flash_Size":4194304,"Sketch_Size":519904,"Free_Sketch_Space":3653632,"CPU_Frequency":80,"Real_Flash_Size":4194304,"Free_Heap":30344,"HEAP_Fragmentation":5,"Free_BlockSize":29040,"json_memory_usage":1358,"json_capacity":2048,"runtime":110,"ws_clients":1,"MQTT_Json":false},"Pack":{"Voltage":0,"Current":0,"Power":0,"SOC":0,"Remaining_Ah":0,"Cycles":0,"BMS_Temp":0,"Cell_Temp":0,"cell_hVt":0,"cell_lVt":0,"cell_hVt2":0,"cell_lVt2":0,"pack_hVt":0,"pack_lVt":0,"pack_hVt2":0,"pack_lVt2":0,"High_CellNr":0,"High_CellV":0,"Low_CellNr":0,"Low_CellV":0,"Cell_Diff":0,"DischargeFET":false,"ChargeFET":false,"Status":"Offline","Cells":0,"Heartbeat":0,"Balance_Active":false,"Fail_Codes":""},"CellV":{},"CellTemp":{}}

AudipowerS4 commented 9 months ago

Maybe was the Port change ? What about difference 2.11 and 2.13 about Ports ?

AudipowerS4 commented 9 months ago

grafik