[Bug]: Command MCHGC not working

[ghsrg]

Is there an existing issue for this?

• [X] I have searched the existing issues

Used Hardware?

Other (please write your hardware in 'What happened?')

What happened?

Command MCHGC not working. QMCHGCR return 010 020 030 040 050 060 070 080 But MCHGC010, MCHGC020, MCHGC030 etc return NAK

With PDx, PEx, PCP02, PCP01 no problem I'm using Powmr 4.2 and NodeMCU analog WeMos D1 mini Flash 4Mb

Screenshots / Fotos

Steps To Reproduce

Sending [MCHGC010] to Device [C: MCHGC010][CR: 7373][CC: 7373][L: 3]

Version

1.x.x and above

Relevant livejson output

{"EspData":{"Device_name":"Solar2MQTT","ESP_VCC":2.984,"Wifi_RSSI":-33,"sw_version":"1.1.7","Free_Heap":18848,"HEAP_Fragmentation":25,"json_memory_usage":939,"json_capacity":2048,"runtime":204,"ws_clients":1,"detect_protocol":2},"DeviceData":{"Device_Model":"VMII-NXPW5KW","Protocol_ID":"PI30"},"LiveData":{"AC_in_Voltage":225.1,"AC_in_Frequenz":49.9,"AC_out_Voltage":225.1,"AC_out_Frequenz":49.9,"AC_out_VA":607,"AC_out_Watt":496,"AC_out_percent":14,"Inverter_Bus_Voltage":440,"Battery_Voltage":27.7,"Battery_Charge_Current":4,"Battery_Percent":100,"Inverter_Bus_Temperature":40,"PV_Input_Current":0,"PV_Input_Voltage":0,"Battery_SCC_Volt":0,"Battery_Discharge_Current":0,"Status_Flag":10101,"Battery_voltage_offset_fans_on":0,"EEPROM_Version":0,"PV_Charging_Power":0,"Device_Status":110,"Battery_Load":4,"PV_Input_Power":0,"Inverter_Operation_Mode":"Line","Time_until_absorb_charge":0,"Time_until_float_charge":0,"Tracker_temperature":0,"Inverter_temperature":40,"Battery_temperature":28,"Transformer_temperature":31,"Fan_speed":35,"Inverter_charge_state":"Float"}}

What browsers are you seeing the problem on?

Chrome

[softwarecrash]

https://github.com/softwarecrash/Solar2MQTT/blob/master/Protocol/PI30MAX.Communication.Protocol20210217.pdf try like this