Logger - AEG inverter integration

[Kyle-Swanepoel]

Hi team,

This request is from Herman Redelinghuys regarding integration of the AEG inverters via MODBUS to the logger. I've attached the MODBUS protocol documents sent to me by the client.

I believe we have an AEG inverter in the store that we could potentially use for testing.

The client is requesting features much like the Axpert Ai interface if possible.

• Load shedding prep function
• Bypass/Error bypass mode to grid
• Ability to turn charge controller ON/OFF (if possible)
• Time of use table - Refer to Issue #50 for a similar spec. Client wants to do load shifting and peak shaving.

Their intention is also to make use of the logger relays, I believe the current expressions will be more than sufficient for their use case.

Thanks, Kyle 8000048225_05_BAL_EN (1).pdf Convert SC Flex_BAL_Modbus RTU_TCP_EN (1).pdf

[Khykn]

Communication established with the inverters. Both inverters have static IP addresses. Modbus TCP available.

Only network and serial comms info/setup available on the web interface.

Port 3 on switch - 75.120 - Battery Charger Port 4 on switch - 75.121 - Convert SC Flex port - 502

[Kyle-Swanepoel]

Integration complete

---