Open bmthr opened 10 months ago
Hi @bmthr
Which of my RGBtoHDMI board have you got? Did you build it yourself or buy it from somebody?
Please can you show a picture of the issue you are seeing.
I build it by myself, I build almost 200 boards TTL and CPLD and never found problem like this...
Pictures if CPLD board and RPi attached...
When I connect all to Amiga, screen is black, there is no any message or info on screen even button not work. If I connect only RPi to HDMI and connect power supply I get message CPLD not fitted. As I say before, when I put this RPi to Small TTL RGBtoHDMI adapter all is working well.
Hi @bmthr
This is not one of my RGBtoHDMI board designs - it is one from LinuxJedi.
Normally, when I have issues with the a CPLD based RGBtoHDMI board, it is because there is a cold solder joint on one of the pullup resistors or capacitors, or (a cold joint or short) on a CPLD pin.
Yes, I know that, but I tested this Rpi with other CPLD board (have it 3 on stock now) and problem is same, but all boards work fine with RPi v1.3
What RGBtoHDMI firmware version are you using?
Get the latest stable version from:
https://github.com/hoglet67/RGBtoHDMI/releases
or the latest beta versions from:
https://github.com/IanSB/RGBtoHDMI/releases
I've have also come across issues where the CPLD RGBtoHDMI board did not work until you tried a different microSD card on the Pi.
Hi all,
My problem is that my RPi ZERO WH not working wiith CPLD RGB to HDMI adapter on Amiga 500. RPi 1.3 work well with this adapter and RPi WH working well with TTL adapter. RPi WH if not connected to CPLD adapter board show menu CPLD not fitted, but when I connect it to CPLD board stuck on empty black screen.
Did I miss some settings? Any help about my problem?
Thank You!