search

soligen2010 / Adafruit_ADS1X15

Driver for TI's ADS1x15: 12 and 16 bit Differential or Single-Ended ADC with PGA and Comparator
Other
61 stars 30 forks source link

Regarding the ADS1115 and continuous mode! #5

Closed xDGameStudios closed 7 years ago

xDGameStudios commented 7 years ago

I wanted to know if it is possible to have continuous mode turned on, on A0 and A1 at the same time. And if not what workaround would you suggest?! I need to read data from 2 sensors with a 500Hz sample rate (as steady as possible) is a medical application project (in a beginning test stage). Thank you for your time

soligen2010 commented 7 years ago

The chip is not capable of that. You would need to use 2 chips for that on two different I2C addresses

On May 23, 2017 2:52 PM, "xDGameStudios" notifications@github.com wrote:

I wanted to know if it is possible to have continuous mode turned on, on A0 and A1 at the same time. And if not what workaround would you suggest?! I need to read data from 2 sensors with a 500Hz sample rate (as steady as possible) is a medical application project (in a beginning test stage). Thank you for your time

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/soligen2010/Adafruit_ADS1X15/issues/5, or mute the thread https://github.com/notifications/unsubscribe-auth/APx9EIlsJTZsBNVgPRNenCbNNdknmBFlks5r8yrggaJpZM4NkHwq .