Closed Icenowy closed 7 months ago
Have run SuperTuxKart on Pioneer + RX7600 ( 0000:03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 33 [Radeon RX 7700S/7600S] [1002:7480] (rev cf)
) for ~20h.
@Icenowy Do you know if this still works on sg2042-master
branch (as of https://github.com/sophgo/linux-riscv/commit/257e38596db40eef4a23412d91d57e888f20d581)?
If it does still work for you, can you share your kernel config or any other details about your system configuration?
I am trying to get an RX 7800 XT to work with a Pioneer 1.2 board but getting a kernel oops as soon as it finishes loading all the firmwares, after the message [drm] Display Core failed to initialize
.
@silvanshade
you may try revert "e7d0ed665196 drivers: pci: support msix in PCIe rc0 for milkv mainboard"
发件人: silvanshade @.> 发送时间: 2024年3月26日 19:52 收件人: sophgo/linux-riscv @.> 抄送: xiaoguang.xing 邢晓光 @.>; State change @.> 主题: Re: [sophgo/linux-riscv] Support DCN-enabled AMD Graphics cards (PR #100)
@Icenowyhttps://github.com/Icenowy Do you know if this still works on sg2042-master branch (as of 257e385https://github.com/sophgo/linux-riscv/commit/257e38596db40eef4a23412d91d57e888f20d581)?
If it does still work for you, can you share your kernel config or any other details about your system configuration?
I am trying to get an RX 7800 XT to work with a Pioneer 1.2 board but getting a kernel oops as soon as it finishes loading all the firmwares, after the message [drm] Display Core failed to initialize.
― Reply to this email directly, view it on GitHubhttps://github.com/sophgo/linux-riscv/pull/100#issuecomment-2020220073, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A5F7XWKIJGAZECJDW3PPKK3Y2FORBAVCNFSM6AAAAABB75TWF2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMRQGIZDAMBXGM. You are receiving this because you modified the open/close state.Message ID: @.***>
force pushed to add my own SoB.