search

sorax000 / wiiflow

Automatically exported from code.google.com/p/wiiflow
0 stars 0 forks source link

ISO forwarders fail to load in Wiiflow, but not in CFGUSB Loader #38

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1.Install any of the ISO forwarders from http://gbatemp.net/index.php?
showtopic=181011 onto your WBFS partition.
2.Load ISO from Wiiflow (Currently using R16)
3.Toggle video modes (to no avail)

What is the expected output? What do you see instead?
Boot ISO, show splash screen, homebrew app boots (FCEU Ultra, ScummVM, 
Triiforce, etc.)  Instead of booting the forwarders, it just hangs on a 
black screen and the wiimotes turn off.  A hard reset is necessary to 
restore function in the Wii.

What version of the product are you using? On what operating system?
Sys Menu 4.1, IOS 249 rev 14 by waninkoko, booting wiiflow R16 249 from 
preloader 0.29 JODI

Please provide any additional information below.
I've actually gotten these forwarders to load with wiiflow, but it's rare 
and adjusting the video mode settings are unsuccessful.  I tried 
configurable USB loader v45 to see if it was the ISOs or wiiflow, and CFG 
USB loader loads them fine every time.  I love your app and would like it 
if you were able to implement the ability to boot these ISOs as I believe 
they would render the wii menu useless.  
Thank you for your contributions

Original issue reported on code.google.com by ognpKFPB...@insan.ity.ns0.it on 25 Oct 2009 at 6:58

GoogleCodeExporter commented 8 years ago 
Where do you get compiled R16 from?
Use video mode auto patch to start the forwarders.
Try official compiled R16 Beta:
http://www.mediafire.com/file/nimijjzmymn/WiiflowR16beta_249.zip

Original comment by Naro...@googlemail.com on 25 Oct 2009 at 7:55

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
I compiled your updated R16 source from 
http://wiiflow.googlecode.com/svn/trunk/ with
Devkitpro r17 and the libogc from your wiki.  The info screen in wiiflow said 
r16(b i
think?) so i was pretty sure i compiled properly.  i'll download your mediafire 
dol
and try the autopatch setting again.
Thanks for replying so quickly and I'll post how it went :)

Original comment by ognpKFPB...@insan.ity.ns0.it on 25 Oct 2009 at 8:15

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
Ok, I used your R16 dol and the "autopatch" setting and was still getting the 
freeze,
so I renamed my wiiflow.ini on my USB drive to something else so that wiiflow 
would
generate me a fresh one and the problem was resolved.  
I did some troubleshooting and it seems the problem arises when I hide the 
forwarder
iso in the parental control settings.  I couldn't reproduce the error 
consistently,
but it froze more than worked.
While troubleshooting, I got 2 code dumps, which I took pictures of and 
included in
this zip, along with a copy of my original wiiflow.ini file that was causing the
problems, in case you wanted to take a look at them:
http://www.mediafire.com/download.php?gryuteazzit
Thanks for your help and hopefully you can figure out what's going on.  I'd 
really
like to hide the Homebrew Channel forwarder so that the kids can't screw 
something up :)

Original comment by ognpKFPB...@insan.ity.ns0.it on 25 Oct 2009 at 10:31

GoogleCodeExporter commented 8 years ago 
Update: Tested Rev 17 with a fresh wiiflow.ini and my hidden forwarder iso 
problem
persists.

Original comment by ognpKFPB...@insan.ity.ns0.it on 28 Oct 2009 at 8:42

GoogleCodeExporter commented 8 years ago 
I am using rev17 and I am using forwarder iso's for homebrew channel, internet 
channel, 
sega genesis, snesgx, mplayerce, gameboy advance and all work perfectly. You 
may have 
some invalid ones. Also my files that the forwarders go to are on a seperate 
partition 
of the usb device. I have also put these apps on sd card and they work there as 
well. 
Something else must be going on.

Original comment by mgrimmen...@gmail.com on 30 Oct 2009 at 4:42

GoogleCodeExporter commented 8 years ago 
I've tried the forwarder iso's and all of them works fine. Someone else with 
these
problems?

Original comment by Naro...@googlemail.com on 30 Oct 2009 at 3:28

GoogleCodeExporter commented 8 years ago

Original comment by Naro...@googlemail.com on 17 Nov 2009 at 10:03