Open MaikelKelder opened 11 months ago
Same issue. Did you ever find the correct cover?
I believe the BTT files will work https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/cable_door_EBB_SB.stl
I will check it out, thx!
Op wo 8 nov 2023 om 03:02 schreef k5beason @.***>
I believe the BTT files will work https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/cable_door_EBB_SB.stl
— Reply to this email directly, view it on GitHub https://github.com/sorted01/Filametrix/issues/24#issuecomment-1800886625, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJAM5W6RNPV4PGLWDRJQM53YDLR2VAVCNFSM6AAAAAA6LBQM2CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBQHA4DMNRSGU . You are receiving this because you authored the thread.Message ID: @.***>
I will check it out, thx!
Op wo 8 nov 2023 om 03:02 schreef k5beason @.***>
I believe the BTT files will work
—
Reply to this email directly, view it on GitHub
https://github.com/sorted01/Filametrix/issues/24#issuecomment-1800886625,
or unsubscribe
.
You are receiving this because you authored the thread.Message ID:
@.***>
Let me know. On mine the bottom securing screw hole is about 1-2mm off still. I can't find any other covers that are close.
same problem, but solved. I modified the cable door from BTT. you can find it here.
https://www.printables.com/de/model/849383-cable-door-forstealthburner-cw2-filametrix-with-ec
Thank you!!
On Fri, 19 Apr 2024 at 16:47, gabber130779 @.***> wrote:
same problem, but solved. I modified the cable door from BTT. you can find it here.
https://www.printables.com/de/model/849383-cable-door-forstealthburner-cw2-filametrix-with-ec
— Reply to this email directly, view it on GitHub https://github.com/sorted01/Filametrix/issues/24#issuecomment-2066739127, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJAM5WYQ4MAPITMXMU7HCCTY6EVBPAVCNFSM6AAAAAA6LBQM2CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWG4ZTSMJSG4 . You are receiving this because you authored the thread.Message ID: @.***>
Thank you!!
On Fri, 19 Apr 2024 at 16:47, gabber130779 @.***> wrote:
same problem, but solved. I modified the cable door from BTT. you can find it here.
https://www.printables.com/de/model/849383-cable-door-forstealthburner-cw2-filametrix-with-ec
— Reply to this email directly, view it on GitHub https://github.com/sorted01/Filametrix/issues/24#issuecomment-2066739127, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJAM5WYQ4MAPITMXMU7HCCTY6EVBPAVCNFSM6AAAAAA6LBQM2CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWG4ZTSMJSG4 . You are receiving this because you authored the thread.Message ID: @.***>
Did it fit now?
No, doenst fit, I guess the version with a double sensor in there is thicker or so. Im using the OLD version of the CW2 motor plates, because of that, double sensors. It also has a cutout for the 2209 canbus on the bottom. I guess I have to get creative to get one fitting ;-)
I am going to try this body, also double sensor, but no cutout and sensor is screwed on from bottom, much better. Lets see if I can find a door for that, otherwise, ill make one and post it.
Ok, I jus tprinted and fitted these and they work together. Your cover also fits but the hole for the screw is only just out of place, 2mm or so.
Vented Cover: https://www.printables.com/model/772880-ebb-sb22402209-vented-cable-door-jan-2024-update/files
double sensor CW2 plate: https://www.printables.com/model/826480-filametrix-body-cw2-for-sb2209sb2240-with-dual-fil
Hi,
Not really an issue, but when using this SB_CS2_Main_Buddy_EBB_ECAS_D2F you leave a big gap open when using the default cable cover for the Stealthburner. I wasnt able to find a adjusted one, I almost assume it exists?
Thanks for the MOD, its a beast! saving so much issues swapping filaments.