Closed juliusjj25 closed 1 year ago
Thank you so much! :) I've added it to the files and updated the readme. I hope this is fine!
I would close the "not an issue" :D
@juliusjj25 Which PCB cover are you using for this? The original cover leaves a considerable gap.
@akillmer I am using the one from the BTT SB2209 design on Github https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/cable_door_EBB_SB.stl
@juliusjj25 Does this use a 5.5mm ball bearing for the filament sensor? Better yet, do you have a step file for the main body? I do not intend to use the filament sensor and would like to remove the added resistance from the system. Thanks!
@juliusjj25 Does this use a 5.5mm ball bearing for the filament sensor? Better yet, do you have a step file for the main body? I do not intend to use the filament sensor and would like to remove the added resistance from the system. Thanks!
This uses the 7mm bearing ball from the ERCF usermods. I appear to have misplaced the step file for these mods.
Not an issue, but I took your CAD modifications and applied them to the Rapido Toolhead design and created the CW2 main body for the ERCF w/ ECAs, bearing switch, and SB2209 Canbus mods
@CheeseFrog V2.4559
Rapido & SB2209.zip