Open TheMaxx2804 opened 6 months ago
I could use help woth the same problem. Has anyone figures it out yet?
Yes. remove the black plastic ptfe adapter. I removed it and printed a sleeve that holds the ptfe in place for cutting.
Yes. remove the black plastic ptfe adapter. I removed it and printed a sleeve that holds the ptfe in place for cutting.
Thank you for this information. As you can see there is a little height gap from between the silver collar and the printed part. So the cutting knife has to be cut in length that it does stay on the silver collar and that it could not flip down that collar.
Hi there,
i am missing the mounting / building instruction for the V6_R6 Hotend. As shown in the picture the hotend is standing out some mm from the print head back and front piece. In this case i do not know how the knife would be mounted to work correctly.
Thank you in advance for any suggestions.