Closed jeanconn closed 1 year ago
The new custom pixel state is great!
I think there is a tidier path to getting the commands and subsequent states that reuses functionality built into kadi. See: https://gist.github.com/taldcroft/fb0998994cfebc22d06791dc5540c723
I would suggest to close this for now. If we get back to switching pixel mode again we can re-open it.
NOTE: This PR was closed, because pixel mode is not going to change in the near future.
After backstop 7.9 (FSDS-83), there were some changes in backstop. Specifically:
ALT
- TLMSID= AAC1CCSC, HEX= 348E040, MSID= AAC1CCSC, AACKSUM=71 , AAWRDCNT=2
+ TLMSID= AAC1PTLM, CMDS= 3, FIELD=2
ORIG
- TLMSID= AAC1CCSC, HEX= 3492040, MSID= AAC1CCSC, AACKSUM=73 , AAWRDCNT=2
+ TLMSID= AAC1PTLM, CMDS= 3, FIELD=0
Similarly, if the background algorithm is set:
Description
Check the PEA pixel mode for ORs is set to ORIG
These are PEA1 commands, corresponding PEA2 commands are AAC2PTLM and AAC2BGD.
Interface impacts
Testing
Tested out of ska3-matlab-2023.4rc6 though that should not be required.
Unit tests
Functional tests
I edited JUL0323A backstop to remove the first command to switch back to ORIG after perigee for this output:
https://icxc.cfa.harvard.edu/aspect/test_review_outputs/starcheck-pr414/jul0323a_orig_removed.html
I edited JUL0323A backstop to move the first command to switch back to ORIG after perigee to be in the next OR for this output:
https://icxc.cfa.harvard.edu/aspect/test_review_outputs/starcheck-pr414/jul0323a_orig_moved.html