souldiver / open9x

Automatically exported from code.google.com/p/open9x
0 stars 0 forks source link

vario tone: change range for inner audio limits to -2..+1 and -1..+2 #190

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago
Which board (stock / gruvin9x / sky9x) are you using? any with audio out and 
telemetry

What is your open9x FW version? 1905

What is your open9x EEPROM version? 213

What steps will reproduce the problem?
1. configure a vario
2. use inner limits of 0,0
3. The tone will be unstable allways changing between sink and lift, as it 
drifts around 0m/s

What is the expected output? What do you see instead?
My suggestion is to make it possible to change the two inner limit to a range 
of -2..+1 and -1..+2 . It should be assured that they do not overlap though.
this would enable us to configure a aound that has a stable tone without lift, 
changing to a beeping in lift and changing to a lower tone as thevertical speed 
goes down.

Thanks,

rainer

Original issue reported on code.google.com by Raine...@gmail.com on 4 Feb 2013 at 5:04

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 5 Feb 2013 at 6:47

GoogleCodeExporter commented 8 years ago
But ... this is already the case, no? For example you can choose these values:
[-10 -0.5 -0.5 10]

Original comment by bson...@gmail.com on 6 Feb 2013 at 9:40

GoogleCodeExporter commented 8 years ago
no i can´t. from the above the 2 inner values have limits of -2..0 and 0..2 

Original comment by Raine...@gmail.com on 6 Feb 2013 at 11:11

GoogleCodeExporter commented 8 years ago
Did you try to lower the center low value before lower the center high value?

Original comment by bson...@gmail.com on 6 Feb 2013 at 11:23

GoogleCodeExporter commented 8 years ago
Oh, i see what you mean. but it is not working in bot ways!
-10 -0.5 -0.5 10 is possible
but
-10 0.5 0.5 10 is not possible

I would like to achieve a setting like the second example above.
this would enable a stable tone when there is no lift changing to beeping in 
lift

Original comment by Raine...@gmail.com on 6 Feb 2013 at 12:00

GoogleCodeExporter commented 8 years ago

Original comment by bson...@gmail.com on 6 Feb 2013 at 8:29