Add full support to T12 - auto mode

souliss / bindingopenhab

Binding to connect your Souliss Network to openHAB

10 stars 6 forks source link

Add full support to T12 - auto mode #1

Closed fazioa closed 8 years ago

fazioa commented 9 years ago

TO DO - Support to auto mode

Command recap, using:

1(hex) as command, toogle the output
2(hex) as command, the output move to ON the mode is reset
4(hex) as command, the output move to OFF the mode is reset
8(hex) as command, the mode is set to AUTO
8(hex) as command, time the output to ON if in AUTO
0(hex) as command, no action

Output status,

0(hex) for output OFF and mode not in AUTO,
1(hex) for output ON and mode not in AUTO,
F0(hex) for output OFF and mode in AUTO,
F1(hex) for output ON and mode in AUTO.

fazioa commented 9 years ago

@plinioseniore @FulvioSpelta Your opinion? Can we add support or leave to OH auto-mode function?

plinioseniore commented 9 years ago

This is useful, because you can set the T12 in manual to avoid that is triggered automatically.

Should be supported in OH.

Dario.

From Mobile. On 17 Mar 2015 23:03, "fazioa" notifications@github.com wrote:

@plinioseniore https://github.com/plinioseniore @FulvioSpelta https://github.com/FulvioSpelta Your opinion?

— Reply to this email directly or view it on GitHub https://github.com/souliss/bindingopenhab/issues/1#issuecomment-82616575 .