[SP2019]Pack team kits - Githubissues

sourcebots / tasks

Things that we need to do

MIT License

1 stars 0 forks source link

[SP2019]Pack team kits #119

Closed Adimote closed 5 years ago

joe9599 commented 5 years ago

worst case can we put things on the big table, and they collect it

RealOrangeOne commented 5 years ago

We probably need a list of things we need to be put in kits before we pack them

RealOrangeOne commented 5 years ago

Camcons

2 large
3 medium
2 small

kierdavis commented 5 years ago

Kit status (will be kept up to date as things change):

Tick when item has been put into every kit RUB.

[x] Pi assembly: these need to be tested as a whole (#118)
- Raspberry Pi: these are in the kit boxes but should be tested as mentioned above
- Power hat: these are attached to the Pis
- Micro SD card: these are not in the kit boxes since they need to be flashed (#181)
[x] Power board assembly: packed
- Power board (from SR): packed
- 5mm camcon jumper: attached to power boards
[x] Motor board (from SR): packed
[x] Servo board (from SR): packed
[x] Arduino assembly: packed
- Arduino: packed
- Arduino header shield, USB side: attached to arduinos
- Arduino header shield, power side: attached to arduinos
[x] USB hub: packed
[x] USB stick x 2: packed
[x] Micro USB cable x 3: packed
[x] Not-micro USB cable: packed
[x] Camcon bag: packed
- 7.5mm camcon x 4
- 5mm camcon x 4
- 3.81mm camcon x 2
[x] Sensor bag: packed
- Ultrasound sensor x 2
- Microswitch x 4
[x] Toolkit: packed
[x] Motor x 2: packed
[x] Flag mount: packed

kierdavis commented 5 years ago

@RealOrangeOne I don't think those camcon quantities are correct, please see sourcebots/sbot#46 for what I think they should be and why.

kierdavis commented 5 years ago

Kits have been packed as best we can right now, and their contents double-checked. They are currently missing SD cards, motors and flag mounts.

What still needs to be done:

[ ] Flash the SD cards (#181), put one in each Pi, and check it boots.
[x] Retrieve the motors from B16 and put two in each box.
[x] Find the flag mounts (accidentally taken to B16 with the motors) and put one in each box.

kierdavis commented 5 years ago

Nothing else we can do on this today, updating milestone.

sedders123 commented 5 years ago

We are waiting on access to the 'big flashing gadget' in the lab technicians office to flash multiple cards at once.

kierdavis commented 5 years ago

SD cards flashed. I need to put them in the Pis and briefly test them, then this can be considered complete.

kierdavis commented 5 years ago

Inserted into Pis and checked there is activity on the LEDs when the boot. Not a brilliant test but we didn't have an HDMI cable to hand. We'll discover any actual issues once the teams start trying to use them in robots.

This is now complete.