search

sp00n / corecycler

Script to test single core stability, e.g. for PBO & Curve Optimizer on AMD Ryzen or overclocking/undervolting on Intel processors
Other
729 stars 32 forks source link

Find other programs to test with besides Prime95 #4

Open sp00n opened 3 years ago

sp00n commented 3 years ago

Other programs might be even better suited for stability testing on edge cases, however they need to be able to be called from the command line and they need to stop or write an error log when an error happens, similar to what Prime95 does.

Aida64 Engineering Portable Trial might be worth a shot.

sp00n commented 3 years ago

SuperPi?

AtlAntA118 commented 3 years ago

y-cruncher can be called from command line. It does give stop errors. It has an option to write an output file. Not sure if errors are written to that file as well..

sp00n commented 3 years ago

What is the option for the output file? The v8 branch has support for y-cruncher, but I couldn't find a way to generate a log file for it.

AtlAntA118 commented 3 years ago

You are right. I must have misread some documentation but as far as i can see there is no option for an output file. It does give outputs in the console window. So you could try and write the console window stuff to a txt file with some commands? https://helpdeskgeek.com/how-to/redirect-output-from-command-line-to-text-file/

sp00n commented 3 years ago

Unfortunately I can't. I tried to use > logfile.txt and > logfile.txt 2>&1, but the only thing that appears in there is the "^C" when I abort the now blank screen with CTRL+C. So apparently it does capture the output, but it doesn't write it to a file. Maybe you could give it a try?

Also, there is actually an -o option for writing an output file, but it doesn't do anything at least for stress testing (and in fact it even gives me an "Invalid Parameter: -o" message when I try to use it).

AtlAntA118 commented 3 years ago

Sorry for the late response. I see you got it working anyway. Good job!

ChiefZigZag commented 3 years ago

I used a program recently which was able to find instability way quicker than anything else in regards to boost clock instability.. check this out.. it doesn't give errors the machine literally reboots if it hits a unstable core. I would recommend running this and output it into a file Boosttester.exe > Boost.log before beginning a much lengthier and deeper test core cycler offers. https://github.com/jedi95/BoostTester

sp00n commented 3 years ago

I used a program recently which was able to find instability way quicker than anything else in regards to boost clock instability.. check this out.. it doesn't give errors the machine literally reboots if it hits a unstable core. https://github.com/jedi95/BoostTester

I've used BoostTester before as well, but only to get a glimpse at the maximum possible boost clocks. The program has zero error checking algorithms (you can look at the source code), so it's only useful if your cores are still in a highly unstable state. I could basically run it for hours with -30 on all cores without a problem.

ChiefZigZag commented 3 years ago

I used a program recently which was able to find instability way quicker than anything else in regards to boost clock instability.. check this out.. it doesn't give errors the machine literally reboots if it hits a unstable core. https://github.com/jedi95/BoostTester

I've used BoostTester before as well, but only to get a glimpse at the maximum possible boost clocks. The program has zero error checking algorithms (you can look at the source code), so it's only useful if your cores are still in a highly unstable state. I could basically run it for hours with -30 on all cores without a problem.

I think it depends on the Chip/Board.. I have a 5900x on a Crosshair Impact which passed 48 hours "All" Prime95 Corecycler but it would randomly reboot in certain games .. Running boosttester had it reboot on the first round on the weaker cores, there was more than one! Couldn't get instability on any other tests including AIDA64.. perhaps nothing pushes the boost clocks the same way? I have no idea but it was my experience. My other boards and CPUs didn't experience this at all and Corecycler alone did the trick.

LucidLuxxx commented 1 year ago

Linpack Extreme uses CLI to run benchmarks and stress tests and does print a results.txt file.

sp00n commented 1 month ago

Linpack is now part of the possible stress test programs. It's not necessarily Linpack Xtreme, but one of the binaries you can select (2018) matches the binary that is also used in Linpack Xtreme.

Linpack Xtreme itself is basically just a batch file wrapped in an .exe file and calling the binary with the settings you provide.

BoostTester is included in the /tools/ directory, I've actually created my own slight modification of it now, which includes the changes from Mann1x for slightly higher boost clocks and my own changes to support the new Intel architecture with P- and E-Cores.

Oh, and y-cruncher and Aida64 have been added a long time ago as well. 😅

And still on the lookout for other possible candidates.