Add sub tasks as necessary. Things that'll be on this board:
[x] power regulation to convert battery to 3.3V handled by solar boards
[x] use PyCubed regulator or Sprite for USB
[x] SAMD51 microprocessor design from Sprite design (use QFN package)
[x] 2 radios (RFM98W module and SX1280 breakout. Same footprint)
[x] IMU = BMX160
[x] H-bridge design (talk to @GathererA)
[x] mechanical inhibits. these now live on solar board.
lets try and fit everything (2 radios, H-bridge, IMU, etc..) on a single 35mm x 35mm board.
make it a 4 layer board
add the same microSD card connector as on the OpenMV board. @JeffersonAero Note the design change: use the microSD connector from PyCubed (PN: 503182-1852)
⭐ This is the task to design the motherboard.
Add sub tasks as necessary. Things that'll be on this board:
power regulation to convert battery to 3.3Vhandled by solar boardsmechanical inhibits.these now live on solar board.lets try and fit everything (2 radios, H-bridge, IMU, etc..) on a single 35mm x 35mm board.
add the same microSD card connector as on the OpenMV board.@JeffersonAero Note the design change: use the microSD connector from PyCubed (PN: 503182-1852)