Camera Board Revision 1

spacecraft-design-lab-2019 / documentation

Wiki lives in here

https://github.com/spacecraft-design-lab-2019/documentation/wiki

12 stars 3 forks source link

Camera Board Revision 1 #159

Open NickG-NZ opened 4 years ago

NickG-NZ commented 4 years ago

Revise the OpenMV board

Fit the outline supplied by mechanical team
USB on camera side
Flat flex connector on MCU side and correct orientation
Fix silk layer

NickG-NZ commented 4 years ago

Currently everything in list is complete. Just need to confirm connector location to match up with main board

NickG-NZ commented 4 years ago

After struggling to source OV7725 camera IC's , decided to swap from direct mount (MV3 style) of camera to using a connector (MV4 style). This means the camera can be unplugged directly from an OpenMV4 and plugged in to the satellites camera board. Design has already been completed