search

sparkfun / SparkFun_RTK_Everywhere_Firmware

Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
http://docs.sparkfun.com/SparkFun_RTK_Everywhere_Firmware/
Other
13 stars 7 forks source link

Ham Radio sync #443

Closed wtelliot closed 1 month ago

wtelliot commented 1 month ago

Subject of the issue

I think you missed a key function that should be added. Amateur Radio operators are always looking for ways to improve their radios and test equipment accuracy plus the reliability of their communications. By adding a 10 mhz output and a 1PPS output this device could be a very good tool that Amateur Radio Operators would want. There are many videos out there of improving performance using GPS based frequency standards.

PaulZC commented 1 month ago

Hi @wtelliot ,

The new SparkFun RTK EVK provides access to the GNSS TP (Timing Pulse) signal. The default is 1Hz, but the ZED-F9P supports frequencies up to 10MHz. The RTK Everywhere firmware allows you to set the pulse duration. A stand-alone frequency example is available here.

Best wishes, Paul