sparkfunX / Artemis_Global_Tracker

A global satellite tracker utilising the SparkFun Artemis module, Iridium 9603N satellite transceiver and u-blox ZOE-M8Q GNSS
Other
14 stars 10 forks source link

antenna #8

Closed jerabaul29 closed 3 years ago

jerabaul29 commented 3 years ago

It sounds from the documentation:

https://github.com/sparkfunX/Artemis_Global_Tracker/blob/master/Documentation/Hardware_Overview/README.md

like the "recommended" antenna is the following:

https://www.sparkfun.com/products/15789

PaulZC commented 3 years ago

Yes, that antenna will work fine. It is optimized for Iridium but provides good signal in the GNSS bands too. There are antennas which are tuned for both GNSS and Iridium but they are more expensive. You can't use an active antenna. The Iridium transmit would destroy the active pre-amp. GNSS receivers are so sensitive these days that you really don't need an active antenna unless you are in a poor signal area.

jerabaul29 commented 3 years ago

Thanks! Same, wonder if this should be made sticky and or added to the doc :)

PaulZC commented 3 years ago

Thanks JR (@jerabaul29) - good suggestion. Added here: https://github.com/sparkfunX/Artemis_Global_Tracker/tree/master/Documentation/GlobalTracker_FAQs