search

speeduino / Ardu-Stim

88 stars 68 forks source link

No connection with arduino uno #9

Open hugovw1976 opened 3 years ago

hugovw1976 commented 3 years ago

Hi I try to use this version of ardustim but can connect with arduino uno , I can upload ardustim.ino to arduino uno or arduino mega via arduino ide, but when open Ardu_Stim.0.04 can connect with arduino uno just arduino mega, I only have one arduino mega an is for speeduino I need help. thanks

mike501 commented 3 years ago

Doesn't help directly but I can recompile ardustim for uno and have it happily running so the system is fine, we just need to figure out why yours isn't working. It may get more people to notice & help if you post on slack or the facebook speeduino pages.

When you say you can connect do you mean really mean you can't connect to the UI with the uno but can with the mega? Have you rescanned the ports after the compile has said its finished uploading to the uno?

If you mean it doesn't generate a signal when the uno is connected to the mega running speeduino have you checked the pins ground to ground, uno8 (crank) to mega 19, uno9 (cam) to mega 18

JTR57 commented 3 years ago

Same here but with a Nano. Can't flash the firmware via Ardu_Stim.0.0.4 and 0.0.3 doesn't connect to the old firmware. The old version of ardustim that uses droid4arduino is working properly.

Edit: Compiled and flashed the code via the Arduino IDE and it's working properly with Ardu-Stim.0.0.4.

kinglevel commented 3 years ago

Same here, had to compile it manually in arduino IDE, and now it connected. UNO

m1t1k1 commented 2 years ago

Hello, and can it be done to connect to other versions of hardware such as WAVGAT UNO R3

IndraNurcahyo13 commented 2 years ago

Hi. I've compiled the manual via arduino ide. but when i open and connect to ardustim 0.0.4 application why doesn't it connect.

AmesisProject commented 2 years ago

Yes the version of this git no longer works with the .ino uploaded and the index.html UI. it uses the software in .exe version which is in -> "code" and on the right in "Releases", here you will find the .exe and when you open it you will see your arduino appear and it is from this interface that you will upload the code then you click on connect and everything works. https://github.com/speeduino/Ardu-Stim/releases