search

spegelius / filaswitch

Filament switch post processor for 3D printing
GNU General Public License v3.0
39 stars 11 forks source link

No Zhop even if enabled.. #72

Closed TelliMantelli closed 4 years ago

TelliMantelli commented 4 years ago

I cannot get zhop to work between print and tower. I have enable in my config. Do I also enable in S3D? Thanks!

TelliMantelli commented 4 years ago

Here's a link to my config and gcode. https://drive.google.com/open?id=1WOQkrSo1vcqGDBOBHKuxe-2ajeQDZIlK

spegelius commented 4 years ago

Currently filaswitch follows the slicer settings for z-hop (except for Cura). So if you don't have z-hop enabled in S3D, it won't do it with tower.

TelliMantelli commented 4 years ago

Ahhh ok. So as of right now there no way to have zhop between model and tower only..not between each layers also with S3D?

spegelius commented 4 years ago

Yes, but that could be changed so that hwcfg tower z-hop value is used always.

TelliMantelli commented 4 years ago

That be great to have it work that way! Be willing to test.