search

spenceraxani / CosmicWatch-Desktop-Muon-Detector-v2

The CosmicWatch Desktop Muon Detector supplementary material
244 stars 75 forks source link

I have an issue taking data from two detectors #115

Open Omadre69 opened 8 months ago

Omadre69 commented 8 months ago

Hello Spencer

I hope you are well

I have two detectors and i want to run the import.py application to collect data from both arduinos. Lets say that they have designated com ports 6 and 7. However when it comes to selecting ports [1] COM port 6 [2] COM port 7

when i select: 1,2 the import._data .exe shuts down instantly Troubleshooting

The above is using the import_data.exe file in the version 2 kit

I also used the import_data .py file in the version 3 and although it allows me to select multiple detectors, the data isn’t transfering to the txt file.

jeroenvantilburg commented 8 months ago

Rather than the python script I would suggest to use my webapp instead:CosmicWatch readoutjeroenvantilburg.nlOp 19 mrt 2024 om 11:32 heeft Omadre69 @.***> het volgende geschreven: I have two detectors and i want to run the import.py application to collect data from both arduinos. Lets say that they have designated com ports 6 and 7. However when it comes to selecting ports [1] COM port 6 [2] COM port 7 when select: 1,2 the import._data .exe shuts down instantly Troubleshooting.jpg (view on web)

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>

spenceraxani commented 7 months ago

Hi,

That’s a bit strange of a problem. Are you able to record from a single detector? And, are you sure that those are your two detectors? Often [1] is some bluetooth connection.

You could try adding some print statements to the code to see where it is shutting down. Do your detectors have names? I noticed that if you don’t provide a name via the naming.ino code, you get some non-ascii characters which could potentially cause an issue.

Best,

Spencer

─ Dr. Spencer N. Axani @. @.>

Assistant Professor The University of Delaware 203 Sharp Lab 104 The Green, Newark, DE 19716 (608) 572-8426

On Mar 19, 2024, at 6:32 AM, Omadre69 @.***> wrote:

I have two detectors and i want to run the import.py application to collect data from both arduinos. Lets say that they have designated com ports 6 and 7. However when it comes to selecting ports [1] COM port 6 [2] COM port 7

when select: 1,2 the import._data .exe shuts down instantly Troubleshooting.jpg (view on web) https://github.com/spenceraxani/CosmicWatch-Desktop-Muon-Detector-v2/assets/70434262/1d000749-0b1f-4502-a233-f1ada9094521 — Reply to this email directly, view it on GitHub https://github.com/spenceraxani/CosmicWatch-Desktop-Muon-Detector-v2/issues/115, or unsubscribe https://github.com/notifications/unsubscribe-auth/AANF5O77AY4SPLGO5XIRSC3YZAH5DAVCNFSM6AAAAABE5IUOBKVHI2DSMVQWIX3LMV43ASLTON2WKOZSGE4TINJZGA2DEOI. You are receiving this because you are subscribed to this thread.