search

spenceraxani / CosmicWatch-Desktop-Muon-Detector

OUTDATED! Please do not use this repository for building new detectors. This repository if for the supplementary material used to build the Version 1 of the CosmicWatch Desktop Muon Detectors
59 stars 21 forks source link

PCB populating reference clarification #15

Closed jparshook closed 4 years ago

jparshook commented 5 years ago

On the PCB populating reference sheet, C14 is listed as a resistor (0 Ohm jumper) but is shown as a capacitor on the schematic. Could you please clarify the correct part for C14?

spenceraxani commented 5 years ago

Hi,

C14 can just be shorted with a 0Ohm resistor or a wire.

Thanks,

Spencer

On Apr 10, 2019, at 3:35 PM, cmuEE notifications@github.com wrote:

On the PCB populating reference sheet, C14 is listed as a resistor (0 Ohm jumper) but is shown as a capacitor on the schematic. Could you please clarify the correct part for C14?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/spenceraxani/CosmicWatch-Desktop-Muon-Detector/issues/15, or mute the thread https://github.com/notifications/unsubscribe-auth/ABpeu3q_Z8_9u-jz7UOTgmkmgu3QN609ks5vfjz1gaJpZM4coGMf.