I have a program (grafana-manager) that uses cobra 1.8.0 for command line handling and generating the necessary shell completion for fish-shell.
If I run my command as show below, then it work as expected (no error message) and the program receives the --dashboard-name value as written on the shell prompt ✅.
However, if I attempt to add further arguments to my command by pressing tab, the completion fails with an error (see below).
It appears the generation completion for fish tries to substitute/execute the command public. This results in fish showing errors on the terminal and the completion to fail.
fish: Unknown command: public
in command substitution
called on line 1 of file -
in command substitution
called on line 25 of file -
in function '__grafana_manager_perform_completion'
called on line 1 of file -
in command substitution
called on line 67 of file -
in function '__grafana_manager_perform_completion_once'
called on line 89 of file -
in function '__grafana_manager_requires_order_preservation'
in command substitution
- (line 1): Unknown command
GRAFANA_MANAGER_ACTIVE_HELP=0 ./grafana-manager __complete public-dashboards delete --organization-id 3 --dashboard-name k8s (public) --
^~~~~~~^
in command substitution
called on line 25 of file -
in function '__grafana_manager_perform_completion'
called on line 1 of file -
in command substitution
called on line 67 of file -
in function '__grafana_manager_perform_completion_once'
called on line 89 of file -
in function '__grafana_manager_requires_order_preservation'
in command substitution
fish: Unknown command: public
in command substitution
called on line 1 of file -
in command substitution
called on line 25 of file -
in function '__grafana_manager_perform_completion'
called on line 1 of file -
in command substitution
called on line 67 of file -
in function '__grafana_manager_perform_completion_once'
called on line 89 of file -
in function '__grafana_manager_requires_order_preservation'
in command substitution
- (line 1): Unknown command
GRAFANA_MANAGER_ACTIVE_HELP=0 ./grafana-manager __complete public-dashboards delete --organization-id 3 --dashboard-name k8s (public) --
^~~~~~~^
in command substitution
called on line 25 of file -
in function '__grafana_manager_perform_completion'
called on line 1 of file -
in command substitution
called on line 67 of file -
in function '__grafana_manager_perform_completion_once'
called on line 89 of file -
in function '__grafana_manager_requires_order_preservation'
in command substitution
fish: Unknown command: public
in command substitution
called on line 1 of file -
in command substitution
called on line 25 of file -
in function '__grafana_manager_perform_completion'
called on line 1 of file -
in command substitution
called on line 67 of file -
in function '__grafana_manager_perform_completion_once'
called on line 122 of file -
in function '__grafana_manager_prepare_completions'
in command substitution
- (line 1): Unknown command
GRAFANA_MANAGER_ACTIVE_HELP=0 ./grafana-manager __complete public-dashboards delete --organization-id 3 --dashboard-name k8s (public) --
^~~~~~~^
in command substitution
called on line 25 of file -
in function '__grafana_manager_perform_completion'
called on line 1 of file -
in command substitution
called on line 67 of file -
in function '__grafana_manager_perform_completion_once'
called on line 122 of file -
in function '__grafana_manager_prepare_completions'
in command substitution
Details
Fish-shell 3.7.0
Cobra 1.8.0 (1.5.0 is also affected)
Generated completion
# fish completion for grafana-manager -*- shell-script -*-
function __grafana_manager_debug
set -l file "$BASH_COMP_DEBUG_FILE"
if test -n "$file"
echo "$argv" >> $file
end
end
function __grafana_manager_perform_completion
__grafana_manager_debug "Starting __grafana_manager_perform_completion"
# Extract all args except the last one
set -l args (commandline -opc)
# Extract the last arg and escape it in case it is a space
set -l lastArg (string escape -- (commandline -ct))
__grafana_manager_debug "args: $args"
__grafana_manager_debug "last arg: $lastArg"
# Disable ActiveHelp which is not supported for fish shell
set -l requestComp "GRAFANA_MANAGER_ACTIVE_HELP=0 $args[1] __complete $args[2..-1] $lastArg"
__grafana_manager_debug "Calling $requestComp"
set -l results (eval $requestComp 2> /dev/null)
# Some programs may output extra empty lines after the directive.
# Let's ignore them or else it will break completion.
# Ref: https://github.com/spf13/cobra/issues/1279
for line in $results[-1..1]
if test (string trim -- $line) = ""
# Found an empty line, remove it
set results $results[1..-2]
else
# Found non-empty line, we have our proper output
break
end
end
set -l comps $results[1..-2]
set -l directiveLine $results[-1]
# For Fish, when completing a flag with an = (e.g., <program> -n=<TAB>)
# completions must be prefixed with the flag
set -l flagPrefix (string match -r -- '-.*=' "$lastArg")
__grafana_manager_debug "Comps: $comps"
__grafana_manager_debug "DirectiveLine: $directiveLine"
__grafana_manager_debug "flagPrefix: $flagPrefix"
for comp in $comps
printf "%s%s\n" "$flagPrefix" "$comp"
end
printf "%s\n" "$directiveLine"
end
# this function limits calls to __grafana_manager_perform_completion, by caching the result behind $__grafana_manager_perform_completion_once_result
function __grafana_manager_perform_completion_once
__grafana_manager_debug "Starting __grafana_manager_perform_completion_once"
if test -n "$__grafana_manager_perform_completion_once_result"
__grafana_manager_debug "Seems like a valid result already exists, skipping __grafana_manager_perform_completion"
return 0
end
set --global __grafana_manager_perform_completion_once_result (__grafana_manager_perform_completion)
if test -z "$__grafana_manager_perform_completion_once_result"
__grafana_manager_debug "No completions, probably due to a failure"
return 1
end
__grafana_manager_debug "Performed completions and set __grafana_manager_perform_completion_once_result"
return 0
end
# this function is used to clear the $__grafana_manager_perform_completion_once_result variable after completions are run
function __grafana_manager_clear_perform_completion_once_result
__grafana_manager_debug ""
__grafana_manager_debug "========= clearing previously set __grafana_manager_perform_completion_once_result variable =========="
set --erase __grafana_manager_perform_completion_once_result
__grafana_manager_debug "Successfully erased the variable __grafana_manager_perform_completion_once_result"
end
function __grafana_manager_requires_order_preservation
__grafana_manager_debug ""
__grafana_manager_debug "========= checking if order preservation is required =========="
__grafana_manager_perform_completion_once
if test -z "$__grafana_manager_perform_completion_once_result"
__grafana_manager_debug "Error determining if order preservation is required"
return 1
end
set -l directive (string sub --start 2 $__grafana_manager_perform_completion_once_result[-1])
__grafana_manager_debug "Directive is: $directive"
set -l shellCompDirectiveKeepOrder 32
set -l keeporder (math (math --scale 0 $directive / $shellCompDirectiveKeepOrder) % 2)
__grafana_manager_debug "Keeporder is: $keeporder"
if test $keeporder -ne 0
__grafana_manager_debug "This does require order preservation"
return 0
end
__grafana_manager_debug "This doesn't require order preservation"
return 1
end
# This function does two things:
# - Obtain the completions and store them in the global __grafana_manager_comp_results
# - Return false if file completion should be performed
function __grafana_manager_prepare_completions
__grafana_manager_debug ""
__grafana_manager_debug "========= starting completion logic =========="
# Start fresh
set --erase __grafana_manager_comp_results
__grafana_manager_perform_completion_once
__grafana_manager_debug "Completion results: $__grafana_manager_perform_completion_once_result"
if test -z "$__grafana_manager_perform_completion_once_result"
__grafana_manager_debug "No completion, probably due to a failure"
# Might as well do file completion, in case it helps
return 1
end
set -l directive (string sub --start 2 $__grafana_manager_perform_completion_once_result[-1])
set --global __grafana_manager_comp_results $__grafana_manager_perform_completion_once_result[1..-2]
__grafana_manager_debug "Completions are: $__grafana_manager_comp_results"
__grafana_manager_debug "Directive is: $directive"
set -l shellCompDirectiveError 1
set -l shellCompDirectiveNoSpace 2
set -l shellCompDirectiveNoFileComp 4
set -l shellCompDirectiveFilterFileExt 8
set -l shellCompDirectiveFilterDirs 16
if test -z "$directive"
set directive 0
end
set -l compErr (math (math --scale 0 $directive / $shellCompDirectiveError) % 2)
if test $compErr -eq 1
__grafana_manager_debug "Received error directive: aborting."
# Might as well do file completion, in case it helps
return 1
end
set -l filefilter (math (math --scale 0 $directive / $shellCompDirectiveFilterFileExt) % 2)
set -l dirfilter (math (math --scale 0 $directive / $shellCompDirectiveFilterDirs) % 2)
if test $filefilter -eq 1; or test $dirfilter -eq 1
__grafana_manager_debug "File extension filtering or directory filtering not supported"
# Do full file completion instead
return 1
end
set -l nospace (math (math --scale 0 $directive / $shellCompDirectiveNoSpace) % 2)
set -l nofiles (math (math --scale 0 $directive / $shellCompDirectiveNoFileComp) % 2)
__grafana_manager_debug "nospace: $nospace, nofiles: $nofiles"
# If we want to prevent a space, or if file completion is NOT disabled,
# we need to count the number of valid completions.
# To do so, we will filter on prefix as the completions we have received
# may not already be filtered so as to allow fish to match on different
# criteria than the prefix.
if test $nospace -ne 0; or test $nofiles -eq 0
set -l prefix (commandline -t | string escape --style=regex)
__grafana_manager_debug "prefix: $prefix"
set -l completions (string match -r -- "^$prefix.*" $__grafana_manager_comp_results)
set --global __grafana_manager_comp_results $completions
__grafana_manager_debug "Filtered completions are: $__grafana_manager_comp_results"
# Important not to quote the variable for count to work
set -l numComps (count $__grafana_manager_comp_results)
__grafana_manager_debug "numComps: $numComps"
if test $numComps -eq 1; and test $nospace -ne 0
# We must first split on \t to get rid of the descriptions to be
# able to check what the actual completion will be.
# We don't need descriptions anyway since there is only a single
# real completion which the shell will expand immediately.
set -l split (string split --max 1 \t $__grafana_manager_comp_results[1])
# Fish won't add a space if the completion ends with any
# of the following characters: @=/:.,
set -l lastChar (string sub -s -1 -- $split)
if not string match -r -q "[@=/:.,]" -- "$lastChar"
# In other cases, to support the "nospace" directive we trick the shell
# by outputting an extra, longer completion.
__grafana_manager_debug "Adding second completion to perform nospace directive"
set --global __grafana_manager_comp_results $split[1] $split[1].
__grafana_manager_debug "Completions are now: $__grafana_manager_comp_results"
end
end
if test $numComps -eq 0; and test $nofiles -eq 0
# To be consistent with bash and zsh, we only trigger file
# completion when there are no other completions
__grafana_manager_debug "Requesting file completion"
return 1
end
end
return 0
end
# Since Fish completions are only loaded once the user triggers them, we trigger them ourselves
# so we can properly delete any completions provided by another script.
# Only do this if the program can be found, or else fish may print some errors; besides,
# the existing completions will only be loaded if the program can be found.
if type -q "grafana-manager"
# The space after the program name is essential to trigger completion for the program
# and not completion of the program name itself.
# Also, we use '> /dev/null 2>&1' since '&>' is not supported in older versions of fish.
complete --do-complete "grafana-manager " > /dev/null 2>&1
end
# Remove any pre-existing completions for the program since we will be handling all of them.
complete -c grafana-manager -e
# this will get called after the two calls below and clear the $__grafana_manager_perform_completion_once_result global
complete -c grafana-manager -n '__grafana_manager_clear_perform_completion_once_result'
# The call to __grafana_manager_prepare_completions will setup __grafana_manager_comp_results
# which provides the program's completion choices.
# If this doesn't require order preservation, we don't use the -k flag
complete -c grafana-manager -n 'not __grafana_manager_requires_order_preservation && __grafana_manager_prepare_completions' -f -a '$__grafana_manager_comp_results'
# otherwise we use the -k flag
complete -k -c grafana-manager -n '__grafana_manager_requires_order_preservation && __grafana_manager_prepare_completions' -f -a '$__grafana_manager_comp_results'
Additional context
This feels like a quite dangerous situation if the provided value between the parenthesis was to do something nasty.
If I escape the parenthesis, then the shell completion works as expected ✅ however, running the command fails ❌ because the (escaped) value supplied to the program is not as expected by the program.
What happened?
I have a program (
grafana-manager
) that usescobra 1.8.0
for command line handling and generating the necessary shell completion forfish-shell
.If I run my command as show below, then it work as expected (no error message) and the program receives the
--dashboard-name
value as written on the shell prompt ✅.However, if I attempt to add further arguments to my command by pressing
tab
, the completion fails with an error (see below). It appears the generation completion forfish
tries to substitute/execute the commandpublic
. This results infish
showing errors on the terminal and the completion to fail.I opened an issue (https://github.com/fish-shell/fish-shell/issues/10194) with the fish-shell team but they recommended to follow upstream. They also provided additional information.
Details
3.7.0
1.8.0
(1.5.0
is also affected)Generated completion
Additional context
This feels like a quite dangerous situation if the provided value between the parenthesis was to do something nasty.
If I escape the parenthesis, then the shell completion works as expected ✅ however, running the command fails ❌ because the (escaped) value supplied to the program is not as expected by the program.
Questions