Provide source

[tfroehlich82]

Please provide

• [ ] Schematic
• [ ] Source Code

I need to change the pin of the "Function" key.

[spherical-sound-society]

Hi!

Im afraid that fluorine´s code and schematics are closed source, at least for the moment...

[tfroehlich82]

My DIY Kit does not work, but without schematic it's not possible to find out what the problem is. I don't even know the correct part for the volume pot. Almost every DIY Kit comes with a schematic

[spherical-sound-society]

Volume pots are 10k 5 pin this type

https://es.aliexpress.com/item/1005002246380169.html?spm=a2g0o.order_list.order_list_main.52.21ef194dBcdrM5&gatewayAdapt=glo2esp

You can solder between pins 1 and 2 left center alone and 4 and 5 and get full volume via the jack of the oled.

If you havednt done it yet, reflow the whole PCB. It uses to fix the 90% of the issues. If you still need help, tell me what you have and send some good photos of your building

El sáb, 31 ago 2024 a las 14:26, Thorsten Fröhlich (< @.***>) escribió:

My DIY Kit does not work, but without schematic it's not possible to find out what the problem is. I don't even know the correct part for the volume pot

— Reply to this email directly, view it on GitHub https://github.com/spherical-sound-society/fluorine/issues/3#issuecomment-2322882491, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACPQS5A35VQKV6TKVZPV7X3ZUGY6RAVCNFSM6AAAAABNNGMARCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMRSHA4DENBZGE . You are receiving this because you commented.Message ID: @.***>

[CodeAsm]

Board looks simple enough to reverse engineer. please release schematics :P source, maybe

[tfroehlich82]

I resoldered everything, but it just keeps showing the bootscreen (FLUORINE Logo and FW Version) along with a red light on the RP2040. I tried different firmware versions, all with the same result. It worked only the first time i powered it up, since then only the bootscreen and red light appears. I will try to unsolder the microprocessor in the next few days and do some further tests.

It would be nice if you could at least provide a fw with an alternative pin for the FUNCTION button, since there is no replacement board with a user button available and the WeAct module is really hard to find.

[spherical-sound-society]

Hi Thorsten, could you upload a high res photos of the back and front?

To me it sounds like the OLED you are using is screwed and it´s hanging the rest of the circuit. It happens to us from time to time and that´s how we solve it. So with another uprocessor would probably happen the same. I guess first you have reflowed all the soldering points, right?

Other than that, I wont go to desolder the micro, as its quite difficult to do it without damaging the rest of the circuit. I would start trying with another OLED. The easier way is to just cut the screen and then desolder the four pins

El mar, 17 sept 2024 a las 21:23, Thorsten Fröhlich (< @.***>) escribió:

I resoldered everything, but it just keeps showing the bootscreen (FLUORINE Logo and FW Version) along with a red light on the RP2040. I tried different firmware version, all with the same result. It worked only the first time i powered it up, since then only the bootscreen and red light appears. I will try to unsolder the microprocessor in the next few days and do some further tests.

It would be nice if you could at least provide a fw with an alternative pin for the shift button, since there is no replacement board with a user button available and the WeAct module is really hard to find.

— Reply to this email directly, view it on GitHub https://github.com/spherical-sound-society/fluorine/issues/3#issuecomment-2356718694, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACPQS5EAF5RRKGXXTZEANFDZXB6SXAVCNFSM6AAAAABNNGMARCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJWG4YTQNRZGQ . You are receiving this because you commented.Message ID: @.***>