search

spinixguy / Sovol-SV06-firmware

81 stars 23 forks source link

Sovol printer.cfg and Creality sonic pad #7

Open FriesenRudi opened 1 year ago

FriesenRudi commented 1 year ago

Hi there!

I was trying to use your created printer.cfg with the Sonic Pad. After removing the Line: [include mainsail.cfg] the file could be imported into the pad and also the connection worked. Test for fans was also fine. But when doing the z offset calibration, following error message came up:

"Probe triggered prior to movement"

Do you have any idea for this problem? Is this something that also occurs with the mainsail installation?

Kind Regards

spinixguy commented 1 year ago

It means that the probe was already in a triggered state. Raise your z axis a bit and try it again.

⁣Get TypeApp for Android ​

On Jan 18, 2023, 8:51 AM, at 8:51 AM, FriesenRudi @.***> wrote:

Hi there!

I was trying to use your created printer.cfg with the Sonic Pad. After removing the Line: [include mainsail.cfg] the file could be imported into the pad and also the connection worked. Test for fans was also fine. But when doing the z offset calibration, following error message came up:

"Probe triggered prior to movement"

Do you have any idea for this problem? Is this something that also occurs with the mainsail installation?

Kind Regards

-- Reply to this email directly or view it on GitHub: https://github.com/spinixguy/Sovol-SV06-firmware/issues/7 You are receiving this because you are subscribed to this thread.

Message ID: @.***>

FriesenRudi commented 1 year ago

Hi there,

sorry for answering that late. I was on vacation. The problem is that the sonic pad does a xyz homing when calibrating the z-offset. So even when i raise the z axis before calibrating, after the homing the message occurs again. I have no idea hw to solve this.