Success with X1-5.0-T-D(L)

[Azelphur]

Readme asks us to report success with other inverters, I just had an X1-5.0-T-D(L) fitted and can confirm it works with this library and the home assistant integration (at least, apart from this bug but that's not the fault of this library I think)

Thanks for writing this! :+1:

[straga]

Readme asks us to report success with other inverters, I just had an X1-5.0-T-D(L) fitted and can confirm it works with this library and the home assistant integration (at least, apart from this bug but that's not the fault of this library I think)

Thanks for writing this! 👍

Hello. You are using Solax Smart Meter for Export Control?

[Azelphur]

Hello. You are using Solax Smart Meter for Export Control?

Believe not. I have a meter next to the inverter which monitors how much power is generated, which is an emlite ECA2.z. I currently don't have anything monitoring my grid return, but in a few weeks I'll be getting a SMETS 2 meter fitted that will monitor my grid return, which is standard in the UK.

[straga]

I am asking about Export Control inside the invertor. You can connect Solax Smart Meter over rs485 and set setting for Export Control.

[Azelphur]

Ah, I'm still new to this, only had my inverter for a week. I have never connected anything over RS485, so I'd imagine I'm not using export control. If you know a way to check, happy to do so :)

If it's helpful, I'm on the home assistant discord, feel free to message me.

[straga]

Ok. Thanks for the information.

[squishykid]

Thanks for the nice message @Azelphur! As mentioned on the home assistant issue, I’ll have to have a look if we can figure out how to filter the output. All the best :)

[straga]

If somebody needs more information: Now Emulator Solax Smart Meter works.

• https://github.com/syssi/esphome-modbus-solax-x1/issues/20
• https://github.com/straga/Smart-Meter-Gateway