search

srg74 / WLED-wemos-shield

Wemos D1 Mini (ESP8266) or Wemos ESP32 D1 Mini (ESP32) based universal shield for WLED firmware
https://github.com/srg74/WLED-wemos-shield
MIT License
501 stars 69 forks source link

Bare minimum - Not working #27

Closed Dragi2k closed 3 years ago

Dragi2k commented 3 years ago

Hello,

i have Build the Board and its not Working. Is it Possible that "R8" is needet ?

w00000dy commented 3 years ago

Hello, R8 is not needed for Bare minimum. Can you give more informations? What exactly is not working? Can you send a picture of your assembled board? What are the results of the check steps?

Dragi2k commented 3 years ago

Nur if i shorten r8 it works fine 🤔 ![Uploading 1606245926359932586524304444191.jpg…]()

Dragi2k commented 3 years ago

IMG_20201124_203845 IMG_20201124_203928 IMG_20201124_203956 And the Fuse holes are also wrong, but i dont know, ob this false by pcb-way is

srg74 commented 3 years ago

Some how resistor R8 150 Ohm. You do need this resistor for minimum configuration. Look at BOM v1.3 because your board is v1.3. You can find archive here https://github.com/srg74/WLED-wemos-shield/releases/tag/v1.3. Please when you test install fuse for LED strip. On photo socket for fuse is empty.

Dragi2k commented 3 years ago

I know, fuse is in the way 😉 But what is with the holes of the Fuse holder? IMG_20201124_172633

srg74 commented 3 years ago

Where did you order your PCB?

srg74 commented 3 years ago

WLED_shield_v1 3

Dragi2k commented 3 years ago

Over your link, on pcb-way

srg74 commented 3 years ago

In this case you have to contact PCBway and explain that your board came not routed. They have to repeat your order it's their responsibility.