questions for v3.0 board revision

srg74 / WLED-wemos-shield

Wemos D1 Mini (ESP8266) or Wemos ESP32 D1 Mini (ESP32) based universal shield for WLED firmware

https://github.com/srg74/WLED-wemos-shield

MIT License

490 stars 69 forks source link

questions for v3.0 board revision #94

Closed dakky closed 1 year ago

dakky commented 1 year ago

which version is delivered when ordering via pcbways? the image on pcbway says 3.0 but the lvlshifter is not a smd one, which conflict with the images of 3.0 here in this repo: https://github.com/srg74/WLED-wemos-shield/tree/master/resources/universal_shield
if v3.0: Will the wiki (Assembly) be updated to v3.0?
if v3.0: why the switch to SMD parts? The "easy to assemble"-feature seems deprecated this way
if <v3.0: which BOM is needed for the version delivered by pcbways?

srg74 commented 1 year ago

On this GitHub page is only a one DIY board. You see mix because I also providing fully assembled SMD boards. You have to follow https://github.com/srg74/WLED-wemos-shield/wiki to assemble DIY board. BOM file exist only for TH parts. Difference in v2.1 and v3.0 is only added circuit for PWM fan so basically most of all assembly guide is still good.

dakky commented 1 year ago

so https://github.com/srg74/WLED-wemos-shield/blob/master/resources/BOM/BOM_v3.0.pdf is the BOM to go with?

srg74 commented 1 year ago

Yes and please read carefully wiki for the options. You might want minimum configuration, but not every possible feature.

dakky commented 1 year ago

yes it will be the minimum one. thanks for your support.