Bare soil measured versus estimated.

[josue-medellin]

@jrmerz @andybell

Andy- For the set of figures comparing Delta ET measured through surface renewal versus the one estimated by each method (see https://docs.google.com/spreadsheets/d/1SQprhJN68ORZFqJ7mmJVcaFodZ6RTGN6zmD60sS1aog/edit?usp=sharing

is it possible to have a second line in D5, reporting average monthly of D5_ETa_EC ?

[jrmerz]

Do we know who the owner of that spreadsheet is?

[josue-medellin]

Hi Justin, I think this was postprocessed in R. Here is the link with admin privileges. https://docs.google.com/spreadsheets/d/1SQprhJN68ORZFqJ7mmJVcaFodZ6RTGN6zmD60sS1aog/edit?usp=sharing

I am not entirely positive we can edit the chart for the red line in google sheets. Thanks again.

[josue-medellin]

@jrmerz any news on this one? All we need to do is to add a second red line for D5, the one shown is for the surface renewal station. We need one for the ET station.

[jrmerz]

@josue-medellin so you just need a line for the D5ETa_EC Average (0.144067827)? You mentioned that chart was created in R, if I can get source for that I can definitely take a look.

[josue-medellin]

I think only @andybell has that. Andy, please respond ASAP.

thanks, josue

[nickrsan]

Hey all,

I took a look last night seeing if I could find that script, but couldn't - we'll have to wait until Andy is back next week. Are you just trying to add another line to the above graph? It sounds like you're thinking you can't add that in Google Sheets? Just asking so I can understand what needs to be found, or what I can assist on. Thanks

[jrmerz]

I was curious about this as well. I added a example red line to the charts in the spreadsheet: https://docs.google.com/spreadsheets/d/1SQprhJN68ORZFqJ7mmJVcaFodZ6RTGN6zmD60sS1aog/edit#gid=457758254. See the bottom, 'D5 - JM - Combo Example'. One issue is I can't seem to make it dashed. Otherwise, is there something else I am missing?

[andybell]

Sorry all. I had created those graphs in R since google sheets did not allow for much control for the horizontal line.

Short dash - SR Long dash - EC

Here is a link for a gist with the R code to make the figures: https://gist.github.com/andybell/f7fe7b8a15503839676b27dcec86b4d3

[josue-medellin]

Perfect thanks very much

On Sunday, September 25, 2016, Andy Bell notifications@github.com wrote:

Sorry all. I had created those graphs in R since google sheets did not allow for much control for the horizontal line.

[image: d5] https://cloud.githubusercontent.com/assets/7776675/18818269/27abbf5a-8343-11e6-8a6e-2118f0882950.png

Short dash - SR Long dash - EC

Here is a link for a gist with the R code to make the figures: https://gist.github.com/andybell/f7fe7b8a15503839676b27dcec86b4d3

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/ssj-delta-cu/ssj-overview/issues/35#issuecomment-249447247, or mute the thread https://github.com/notifications/unsubscribe-auth/ANGlbM1EPtJiIi050YbPu6fudKl2f8N2ks5qtuSzgaJpZM4KBDfA .

Josué Medellín-Azuara, Ph.D. Associate Research Engineer Department of Civil and Environmental Engineering Center for Watershed Sciences University of California, Davis One Shields Ave. Davis, CA 95616 Mobile: + 1 530 574 8019 Website: http://watershed.ucdavis.edu/medellin

Convener California Water and Environmental Modeling Forum, CWEMF http://cwemf.org

Be green! Please don't print this e-mail unless you really need to.

[josue-medellin]

@andybell @jrmerz Is it possible put the EC station as dotted or other kind of line and also add a label directly on the chart? Thanks very much.

[andybell]

@josue-medellin The line types are slightly different (long vs short dashes) but I can easily change it to make it more apparent that the lines are different. Labeling the lines on that figure is a good idea.

What do you want the labels to say? What are EC and SR?

[josue-medellin]

EC Station, SR Station for labels, please add SR station to D1 to D3 for consistency

[andybell]

Updated to include labels for station horiz lines - gist with R code is also updated.

[josue-medellin]

Thanks Andy, this should do it.