Open jossef opened 9 years ago
I recently bought this OBD-II arduino adapter.
iv'e defined #define DEBUG Serial and saw these messages in arduino ide serial monitor:
#define DEBUG Serial
SEARCHING...UNABLE TO CONNECT>[865698]ATZ OBDUART v1.0>[865754]ATE0 OBDUART v1.0>[865754]ATE0 ATEOOK)[865807]ATL1 OK>[865860]010C SEARCHING...UNABLE TO CONNECT>[872586]ATZ OBDUART v1.0>[872641]ATE0 OBDUART v1.0>[872641]ATE0 ATEOOK)(872694]ATL1 OK)(872748]010C SEARCHING...UNABLE TO CONNECT>[879473]ATZ OBDUART v1.0>[879528]ATE0 OBDUART v1.0>[879528]ATE0 ATEOOK)(879582]ATL1 OK)(879635]010C SEARCHING...UNABLE TO CONNECT>[886362]ATZ OBDUART v1.0>[886417]ATE0
i debugged the code, and odb.init() keep failing. @stanleyhuangyc Any suggestions?
odb.init()
tested on Arduino Leonardo, My car - Volkswagen Polo 1998
1998 Polo is not supported
is 2000 mk2 punto supported?
I recently bought this OBD-II arduino adapter.
I'm troubleshooting with the rpm-led basic example
iv'e defined
#define DEBUG Serial
and saw these messages in arduino ide serial monitor:i debugged the code, and
odb.init()
keep failing. @stanleyhuangyc Any suggestions?this is how i connected the OBD-II adapter
tested on Arduino Leonardo, My car - Volkswagen Polo 1998