search

starkillerOG / reolink_aio

Reolink NVR/camera API PyPI package
MIT License
68 stars 13 forks source link

RLC-823a PTZ with NVR #14

Closed bs42 closed 1 year ago

bs42 commented 1 year ago

With HomeAssistant 2023.4.0 I enabled the new integration after deleting the reolink_dev I was using before and added my NVR which found all cameras, however for the RLC-423 the PTZ targets were missing. I removed the NVR and added the cameras individually and the PTZ targets show up perfectly in the list for the camera, so I don't know if the issue is with the NVR not sending the data over or with the library not handling it the same with the NVR.

NVR is a RLN16-410 with hardware H3MB18, firmware v3.3.0.226_23031645. RLC-423 has firmware v3.0.0.146_20122309.

I also have an RLC-823a, I don't think the PTZ targets showed up on that one either, but I can't be 100% sure since I don't use that camera the same as the RLC-423.

Anything I can do to help diagnose I'm happy to.

starkillerOG commented 1 year ago

@bs42 this issue is most likely already resolved in HA 2023.4.2, could you update and try again? Please let me know if it is fixed or not.

starkillerOG commented 1 year ago

If you appreciate the reolink integration and want to support its development, please consider sponsering the upstream library.

bs42 commented 1 year ago

Yes, HA 2023.4.2 fixed the issue. I see that it knows what types of cameras they are through the NVR which it did not do on the previous version. Thanks for the update and all the work you are doing on this integration, it is excellent!

starkillerOG commented 1 year ago

@bs42 thanks for the feedback, good to hear it is fixed. If you appreciate the reolink integration and want to support its development, please consider sponsering the upstream library.