search

stawel / cheali-charger

cheap lipo charger
824 stars 275 forks source link

Imax B6 80W clone compatability? #333

Open hojnikb opened 1 year ago

hojnikb commented 1 year ago

Do these recent clones from aliexpress for example still support cheali? Or are they using different, unsupported MCUs?

joshgarde commented 1 year ago

Depends on the clone; can't tell by just looking at the listings. In general though, the ones that advertise 32-bit CPUs are safer bets than just going for the cheapest possible listing because the chances its a reprogrammable ARM are higher

silvio2402 commented 1 year ago

Hi, I hope you are doing well. I bought such a B6 80W clone from here on AliExpress. It has a CMS32L051. Would this be compatible? And would 80W theoretically work with the cheali firmware? I know 80W is a BS number because the included power supply only outputs $12V \times 5A = 60W$. Thanks

diggit commented 1 year ago

Hi @silvio2402, this MCU is currently not supported. Fortunately, it's an ARM with enough storage, so it's definitely doable. The only issue I see is reference manual in chinese. Then someone has to add support for it (C++ coding).

silvio2402 commented 1 year ago

Hi @diggit, I have some electronics and coding knowledge and I'd be willing to invest some time to collaborate to make this work. Is this the reference manual you're referring to? Also, are there any resources available from the cheali-charger project which files need to be created/edited? If you could mention some commits/pull requests which could help me understand what it takes to support another MCU it would be very helpful. I'll have to get familiar with the codebase so is there any documentation? If I need help, is the Google Group an appropriate place to ask about the development? Thanks Edit: Do I need an IDE/which one would you recommend?

diggit commented 1 year ago

Yes, that is reference manual I've found. Maybe it's not exactly necessary to study it, as there is also some code in that keil pack on their website (it's just zip archive).

Regarding cheali development I did not contribute any code here :sweat_smile:. You'll need new directory here https://github.com/stawel/cheali-charger/tree/master/src/hardware that includes some drivers and hw configurations. Look into those already there. Then some changes to cmake configs https://github.com/stawel/cheali-charger/blob/master/CMakeLists.txt etc.

About development tools... I use VSCode/VSCodium with cortex-debug and cmake plugins (some other plugins for higher comfort). As compiler: GCC (arm-none-eabi) works well. STlink/J-Link as SWD probes, but there are other options...

I do this stuff as daily job, so I can also have a look, if you need help. Why everyone has to copy most ugly charger in the world? I'll probably also get one anyway, for science...

silvio2402 commented 1 year ago

Thanks for your reply!

I've downloaded and unpacked the keil pack from the Cmsemicon site and copied the CMSIS, Device, and Driver folders to a new folder at src\hardware\cmsemicon-CMS32L051\cpu\CMSIS and I've copied and adjusted the cmsis.cmake from the nuvoton-M051 cpu present in this repo.

However, some CMSIS drivers/files are missing. From the files included in the nuvoton-M051 cmsis.cmake file, the following files are missing in the cmsemicon-CMS32L051 CMSIS pack: timer.c, uart.c, pwm.c, FMC.c, sys.c, and _syscalls.c. I suppose I have to write them myself?

Also, the CMSIS\Include\core_cm0plus.h file from the pack tries to include cmsis_version.h and cmsis_compiler.h, but they're missing from the pack. Can I copy them from the here: ARM-software/CMSIS_5/CMSIS/Core/Include?

Your job sound really cool btw! I really appreciate your time.

RadioControl commented 1 year ago

Hi,

i purchased also a B6 clone with a CMS32L051 chip. Hopefully there will be a solution for these ones too!... 344799532_618110986905210_1821455676674286902_n 344784644_207949732025637_8957669123632886284_n

RadioControl commented 1 year ago

Hi Silvio,

were you able to move forward with this CMS32L051 project?...

silvio2402 commented 1 year ago

Hi @RadioControl, Unfortunately, I wasn’t. @diggit are you still interested in helping? If not, that’s completely fine and I understand if it’s just not worth your time.

diggit commented 1 year ago

Yeah I can help. I just was not able to persuate myself to buy another B6 clone, so I don't have hw. Keep in mind, that I am not that deeply familiar with cheali internals. I know cmake, C++ and I do embedded FW development (even from scratch), but I will have to look up most of the cheali related stuff may be asking. Anyway, I'll do my best to help.

RadioControl commented 1 year ago

I think a lot of CMS32L051 owner would appreciate that they could use Cheali on their charger. If You were here in the near i would offer mine for the the project. The charger cost about 20 euros, but if someone claim a refund like i did due to misleading description (see pic), it cost just the half... H30994b9e657c459bbf6be48852ebc8561

diggit commented 1 year ago

@RadioControl where did you get yours?

RadioControl commented 1 year ago

@diggit from here

RadioControl commented 1 year ago

Received my new clone with a nice Atmega32A inside... 20230531_105609 20230531_110012

silvio2402 commented 1 year ago

Cool! Do you mind sharing the purchase link? Btw I haven’t had the time to develop it further for the other chip.

RadioControl commented 1 year ago

Just click on "clone" ;) ...Diggit found out that the CMS ones have not the best hw #340. I charged some 3 cell lipos with mine CMS clone in balance mode. I think it's not that bad. Other modes i didn't try.