search

stawiski / Saleae-MIPI-DSI-LP-Analyzer

Saleae logic analyzer library for MIPI DSI Low Power mode commands
GNU General Public License v3.0
17 stars 14 forks source link

MIPI Analyzer use problem #6

Open Benson885168 opened 3 weeks ago

Benson885168 commented 3 weeks ago

Hello Sir,

I've download and install your MIPI DSI LP Analyzer packet in to Saleae Logic2 software but when I choice the signal source, why only have DATA+ and DATA- this two signal source can be choice? didn't saw the Clock signal can choice.

Thank you for your help! David. MIPI

Benson885168 commented 3 weeks ago

@Benson885168 It sounds like you're having trouble with the signal source options in the Saleae Logic2 software.

Yes, how can I solve this problem?

Thanks! David.

Benson885168 commented 3 weeks ago

@Benson885168 Make sure that your Saleae Logic2 software is up to date. Sometimes, updates can fix bugs or add new features.Double-check that all your connections are properly set up, including the clock signal. Ensure that the clock signal is correctly connected to the logic analyzer.Go into the settings of the MIPI DSI LP Analyzer within the Saleae Logic2 software and see if there are any additional configuration options you might have missed.

@Elsiehwoods My Saleae Logic2 Software version is 2.4.14 , I think this was the newest version!? I need to connect all the signal wire to the logic analyzer first? after I check again the software setting and software version, go into "Add Analyzer" and select the "MIPI DSI LP mode" , the signal option still same with before only have DATA+ and DATA-, doesn't have saw the Clock blank. Does I miss any else?

David.

123 21312