open and close roller shutters with percentage timers.

[matteo2019]

I use the fork stefanbode on dual sonoff. I have to open / close the shutters with the timers. Up to this point everything works. The problem is to have the timers open at a certain percentage. For example: at 6.00 o'clock the timer and must close 10% of the shutter. At 7 o'clock the timer must increase the closure by 10% more. and at 8 o'clock I want a timer that opens the whole shutter. (these are just examples, my schedules are different)

[stefanbode]

Shutterposition is not supported in rules.

[matteo2019]

can't you associate a position with a timer?

---

From: stefanbode notifications@github.com Sent: Saturday, July 20, 2019 9:50:20 AM To: stefanbode/Sonoff-Tasmota Cc: matteo2019; Author Subject: Re: [stefanbode/Sonoff-Tasmota] open and close roller shutters with percentage timers. (#161)

Shutterposition is not supported in rules.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/stefanbode/Sonoff-Tasmota/issues/161?email_source=notifications&email_token=AMIAS337SQIXJJFKHLU2KQLQAK7TZA5CNFSM4IFNISS2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2NJCOI#issuecomment-513446201, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMIAS32UZJJAGQTR2LMV3WTQAK7TZANCNFSM4IFNISSQ.

[stefanbode]

As mentioned before all shuttercomands are not available in automation. The idea is fine but I never reviewed what is required to be part of the rules framework. Without: no chance.

[matteo2019]

I'll explain better to avoid misunderstandings, unfortunately I'm not English. I have 2 timers now. One lowers the shutter completely at 13, When the sun comes. The second timer raises the shutter at 7 pm when the sun has completely gone. If I want to raise the blind at 50% at 18.00, can't I?

[snakuzzo]

Now you can't. As explained before, at this time, shuttercommands aren't available in automations. You can just open or close

[matteo2019]

ok clear. If the article is updated in the future.

---

From: snakuzzo notifications@github.com Sent: Tuesday, July 23, 2019 4:45:37 PM To: stefanbode/Sonoff-Tasmota Sonoff-Tasmota@noreply.github.com Cc: matteo2019 matty.emy@hotmail.it; Author author@noreply.github.com Subject: Re: [stefanbode/Sonoff-Tasmota] open and close roller shutters with percentage timers. (#161)

Now you can't. As explained before, at this time, shuttercommands arn't available in automations. You can just open or close

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/stefanbode/Sonoff-Tasmota/issues/161?email_source=notifications&email_token=AMIAS367QQWNPKJMZRORHN3QA4KRDA5CNFSM4IFNISS2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2TLMSY#issuecomment-514242123, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMIAS3YHHF663O3R2DSHDZ3QA4KRDANCNFSM4IFNISSQ.