search

stefanbode / Sonoff-Tasmota

Provide ESP8266 based itead Sonoff with Web, MQTT and OTA firmware using Arduino IDE, enhanced with I2C options
GNU General Public License v3.0
127 stars 41 forks source link

Shelly2 support #79

Closed B1G1 closed 5 years ago

B1G1 commented 5 years ago

Hi Stefan, I would like to buy two shelly2 to control my rolling shutters from 2 buttons i have near the entrance, do you think your firmware could work?

stefanbode commented 5 years ago

Yes it will. I also have 2 Shelly just beside here on the desk to assemble. Looking great

stefanbode commented 5 years ago

But as far as inknownthe shelly only has one relay. Therefore using it for a shutter might not work. Or am I wrong?

B1G1 commented 5 years ago

The shelly2 has 2 relays https://shelly.cloud/shelly2/

stefanbode commented 5 years ago

First read, then understand, then answer. I was too quick with my reply. Yes, indeed it looks like the shelly2 operates 2 relays. In this case, the shutter use case will work. Worst case we have to adapt the configuration a bit. On my desk are only the shelly version2 with one relay. The other order is still open and I wait for delivery. With the single relay for sure, it will not work.