Open majorcool opened 8 years ago
If there's a host blocking ICMP traffic somewhere along the route, traceroute might never know when it has "arrived", and it's even harder to know this when you can't see any output. If this happens then it will just go on until traceroute stops (on mac it's after 64 hops). I suggest just running traceroute manually and then copying the output to the website. If you see a lot of lines with *
showing up at the end, this is most likely what is happening.
Example:
$ traceroute amazonaws.com
[ ... ]
6 bu-ether26.lsancarc0yw-bcr00.tbone.rr.com (66.109.3.230) 42.638 ms 39.093 ms 42.319 ms
7 bu-ether11.tustca4200w-bcr00.tbone.rr.com (66.109.6.5) 60.588 ms 54.393 ms 78.709 ms
8 bu-ether16.dllstx976iw-bcr00.tbone.rr.com (66.109.6.1) 52.357 ms 60.392 ms 75.144 ms
9 0.ae4.pr0.dfw10.tbone.rr.com (66.109.9.105) 74.019 ms
0.ae1.pr0.dfw10.tbone.rr.com (66.109.6.179) 59.598 ms 51.696 ms
10 24.27.236.27 (24.27.236.27) 55.293 ms 146.672 ms 169.692 ms
11 * * *
12 * * *
13 * 54.240.229.20 (54.240.229.20) 92.032 ms
54.240.229.0 (54.240.229.0) 84.410 ms
14 * 54.240.229.172 (54.240.229.172) 207.366 ms
54.240.229.168 (54.240.229.168) 87.961 ms
15 54.240.228.143 (54.240.228.143) 136.652 ms
54.240.229.131 (54.240.229.131) 172.105 ms
54.240.229.133 (54.240.229.133) 149.583 ms
16 54.239.108.182 (54.239.108.182) 172.648 ms
54.239.108.186 (54.239.108.186) 168.964 ms
54.239.109.94 (54.239.109.94) 170.331 ms
17 54.239.109.79 (54.239.109.79) 169.291 ms
54.239.108.199 (54.239.108.199) 137.537 ms
54.239.109.79 (54.239.109.79) 130.623 ms
18 72.21.222.157 (72.21.222.157) 170.836 ms
205.251.245.236 (205.251.245.236) 130.101 ms *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 205.251.248.94 (205.251.248.94) 93.700 ms * *
29 * * *
30 * * *
31 * * *
32 * * *
33 * * *
34 * * *
35 * * *
36 * * *
37 * * *
38 * * *
39 * * *
40 * * *
41 * * *
42 * * *
43 * * *
44 * * *
45 * * *
46 * * *
47 * * *
48 * * *
49 * * *
50 * * *
51 * * *
52 * * *
53 * * *
54 * * *
55 * * *
56 * * *
57 * * *
58 * * *
59 * * *
60 * * *
61 * * *
62 * * *
63 * * *
64 * * *
I found that when I use Mac surge
enhanced mode, the result of my running traceroute becomes:
traceroute to 154.40.47.72 (154.40.47.72), 64 hops max, 72 byte packets
1 198.18.0.1 (198.18.0.1) 18.337 ms
2 *
3 *
4 *
5 *
6 *
...
52 *
...
When I execute $traceroute, it seems like that it never stop, as a result, it never jump to the mapper webpage. Hope someone can tell me how to resolve this.(Mac+zsh)