Bluetooth not working with Taobao card

[MrJosu]

Hi, i successfully installed wifi card from Taobao, but i cannot manage to run bluetooth. Any advice in this?

[stevezhengshiqi]

Please provide your wifi card model or the link of the card.

[MrJosu]

@stevezhengshiqi Card model is BCM943602CS and bought it from https://item.taobao.com/item.htm?_u=u32prbov071e&id=532197802538

[stevezhengshiqi]

Great. You are using the same model as mine. Did you solder D+ and D- wire into pin4 and 5 in WLAN_LTE slot? If you have done the solder thing, please check the Device Manager in Windows to confirm your solder process.

[MrJosu]

Yes, wifi is working, but bluetooth no chance :(

[stevezhengshiqi]

Did you solder your D+ and D- wire, like the picture below?

[MrJosu]

yes, right. I will show you image - https://yadi.sk/i/RBLk0UDG3a9j6T

[stevezhengshiqi]

It seems OK. I will assume your BT is connected. Go to EFI/CLOVER/ACPI/patched and replace SSDT-USB.aml with the one below. SSDT-USB.aml.zip

UPDATE: The newest EFI release uses a new USB injection method. Please replace the following archive with the one in /EFI/CLOVER/kexts/Other/ USBPorts.kext.zip

[MrJosu]

Man, you magician! Thank you so much, i can enjoy my airpods!!! yahoo

[MrJosu]

I think you need mention this in manual :) i know few people bought this thing. Now need to find best place for antennas, to get full speed, now its only 40 perc of maximum

[stevezhengshiqi]

Great News! I will update README.

For the antennas, I personally recommend to stick them behind the trackpad(under the battery). They have to be sticked on the top of the trackpad; otherwise the trackpad can't be clicked.

[MrJosu]

I stick them under, maybe they facing wrong way. If you will have option and you will open your laptop lid please make picture how you mount them. I with friends help was trying solder them 3 times :D i think we something wrong

[MrJosu]

Another think. I can update bios with no issues?

[stevezhengshiqi]

I can share my messy photo of the laptop. The wires are carefully arranged after taking this photo.

For the BIOS, I amn't one hundred percent sure that there's no issue. But theoretically, it's safe.

[MrJosu]

Only one difference, i have 3 antennas :) What you done with your heatsink?

[stevezhengshiqi]

I have 3 antennas too, and one of them is shorter. It is situated in the middle of the trackpad.

[MrJosu]

Lol, i was blind

[shilch]

I ordered a Xiaomi Notebook Pro for hackintoshing. I heard that the default Intel wifi chip can not be replaced but instead the second M.2 slot can be used to insert a Broadcom chip. I found this guide which uses a BCM94352Z and a E to M Key Adapter to use internal wifi with the hackintosh. However, it is said that Bluetooth does not work.

Now I have found this thread and have two questions:
(1) Does the BCM943602CS fit into the M.2 without any adapter? If not, what is the difference to BCM94352Z?
(2) If I have the BCM943602CS inserted into the M.2 slot, what exactly do I have to do to enable Bluetooth?

Thanks in advance!

[fuergaosi233]

I replace SSDT-USB.aml,but i can't use BT. I can look my BT in usb of system report but it's No information found in BT of system report.

[Giannidmg]

which is color the positive cable and which is the negative one?