Problems with the tramlines

[IdkMyUse]

I used the Vaderstad 400C mod with 24m tramlines, but when i go with a 24 meter wide sprayer, tramlines isnt 24m, its more like 26, so i had to use the 20m tramlines, but then the sprayer is too wide. tell me how to fix it plz(FS19)

[punchi21]

If your sprayer width : seeding width = equal number, you need to start with a half width seeding.

[IdkMyUse]

okey so 24/4=6, so the first pass should be notcoundet, cuz i go the 6times around the headland and then i do the mid, so then i go the 1pass with half side shut off, the 2 is full, 3 full, 4the tramline, 5, full, 6 full, so 5 and a half passes?

[punchi21]

basically the problem is, the tramline needs to be in the middle of 24m which is 12m on each side. that would be 3 passes with a 4m. but since the seeders only do tramlines in the center of their working width, its not possible to put a tramline at 12m when going full width. so 1pass halfside 2/3 full, 4 tramline is correct. also only the very first pass has to be half, then you can let the semi automatic/gps counter do the rest

[IdkMyUse]

thank you

[KITT3000]

you just had to look here https://github.com/stijnwop/proSeed/blob/master/docs/ProSeed.pdf

[stijnwop]

Second page is English ;)